749294
42
Zoom out
Zoom in
Previous page
1/196
Next page
42
GB IE
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-

circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
Further safety directions
If the supply cord of this power tool is
damaged, it must be replaced by a spe-
cially prepared cord available through
the service organization.
If it is necessary to replace the connec-
tion cable, we recommend that this be
performed by the manufacturer or an au-
thorised representative (e.g. authorised
workshop, customer service, etc.).
Lay the extension cable in such a way
that it will not be caught by branches or
similar during sawing.
Use a surge protector with a release cur-
rent of 30 mA or less.
Comply carefully with maintenance, con-
trol and service instructions in this manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.
 
at least practice the cutting of logs on a
saw log or frame.
Safety functions
A
1 Rear grip with hand guard
(10)
Protects the hand against branches
and boughs in the case of spring-
ing away by the chain.
3 Chain braking lever/
hand guard
Control system, which stops the
saw chain immediately in case of
a spring-back; lever can also be
activated manually; protects the
left hand of the operator if it slides
from the front grip.
The motor cannot be turned on if
the chain brake has engaged.
5 Saw chain with small
spring-back
Helps you to catch spring-backs
with specially developed control
systems.
17 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
15 Electric motor
Double insulated for safety
reasons.
13 On-off switch with safety
chain brake
On releasing the On/Off switch,
the device immediately switches off.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 307044 PKS 2200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info