Manual Parkside IAN 307044 PKS 2200 A1 (page 41 of 196) (English, German, Dutch, French, Polish)

749294

Zoom out

Zoom in

1/196

IEGB

• Follow instructions for lubricat-

ing, chain tensioning and chang-

ing accessories. Improperly tensioned

or lubricated chain may either break

or increase the chance for kickback.

• Keep handles dry, clean, and

free from oil and grease. Greasy,

oily handles are slippery causing loss

of control.

• Cut wood only. Do not use chain

saw for purposes not intended.

For example: do not use chain

saw for cutting plastic, masonry

or non-wood building materials.

Use of the chain saw for operations

different than intended could result in a

hazardous situation

Causes and operator

prevention of kickback

Beware of kickback! Be careful of

kickback of the machine during

work. There is danger of injury

here. You can avoid kickbacks by

exercising caution and using a cor-

rect sawing technique.

Fig. 1

• Kickback may occur when the nose or

tip of the guide bar touches an object,

or when the wood closes in and pinch-

es the saw chain in the cut

 

• Tip contact in some cases may cause

a sudden reverse reaction, kicking the

guide bar up and back towards the



• Pinching the saw chain along the top

of the guide bar may push the guide

bar rapidly back towards the operator.

• Either of these reactions may cause

you to lose control of the saw which

could result in serious personal injury.

Do not rely exclusively upon the safety

devices built into your saw. As a chain

saw user, you should take several steps

to keep your cutting jobs free from ac-

cident or injury.

Kickback is the result of tool misuse and/

or incorrect operating procedures or condi-

tions and can be avoided by taking proper

precautions as given below:

• 



the chain saw handles, with

both hands on the saw and po-

sition your body and arm to al-

low you to resist kickback forc-

es. Kickback forces can be controlled

by the operator, if proper precautions

are taken. Do not let go of the chain

saw.

• Do not overreach and do not cut

above shoulder height. This helps

prevent unintended tip contact and

enables better control of the chain saw

in unexpected situations.

• Only use replacement bars and

-

facturer. Incorrect replacement bars

and chains may cause chain breakage

and/or kickback.

• Follow the manufacturer´s

sharpening and maintenance

instructions for the saw chain.

Decreasing the depth gauge height

can lead to increased kickback.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 307044 PKS 2200 A1 Manual

Product: