Manual Parkside IAN 307044 PKS 2200 A1 (page 46 of 196) (English, German, Dutch, French, Polish)

749294

Zoom out

Zoom in

1/196

GB IE

If the chain brake does not

function correctly, you must

not use the electric chainsaw.

A slack saw chain leads to

danger of injury.

Return the electric chainsaw to

our Service-Center for repair.

Checking the chain

lubrication

Check the oil level and the chain lubrica-

tion system before commencement of work.

• Switch on the chainsaw and hold it

above a bright background. The saw

must not touch the ground.

If an oil trace can be seen, the chainsaw is

working trouble-free.

If no oil trace can be seen clean the

oil passages or turn the chainsaw

to our Service-Center for repair.

Clean the oil passages of the chain

bar (26), in order to guarantee a

trouble-free, automatic oiling of the

saw chain during operation. Use a

brush or a cloth to help remove resi-

dues from the oil passage.

Changing the saw bar

1. Switch the saw off and unplug it

from the mains (

12).

  

3. Turn the fastening bolt (7) and

the screw for the chain quick-ten-

sioning system (9) in counter-

clockwise direction in order

to loosen the chain tension and to

remove the sprocket chain wheel

cover (8).

4. Remove the saw bar (4) and saw

chain (5). To remove the guide

bar (4), raise it to an angle of ap-

prox. 45 degrees. This will make

it easier to take the saw chain (5)

off the sprocket (24).

5. Replace the blade and install the

blade and chain as described un-

der “Installing the sawing chain

and blade”.

Sawing techniques

General

• You have better control when you saw

with the bottom side of the chain bar

(with pulling saw chain) and not to

with the top side of the chain bar (with

pushing saw chain).

• The saw chain must not contact either the

ground or another object during sawing

through or after sawing completion.

• Make sure that the saw chain does not

become jammed in the wood. Do not

let the tree trunk break or split off.

• Consider also the precautions against

spring-back (see notes on safety).

If the saw chain jams, you

do not attempt to pull out the

electric chainsaw using pow-

er. There is a danger of injury

here. Switch off the motor

and use a lever or wedge to

free the electric chainsaw.

Felling trees

A lot of experience is neces-

sary in felling trees. Cut down

trees only when you can safely

handle the electric chainsaw.

In no case should you use the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 307044 PKS 2200 A1 Manual

Product: