746858

Parkside IAN 292193 PDTS 6.3 A1 Manual

30
Zoom out
Zoom in
Previous page
1/117
Next page
GB/IE/NI30
Safety instructions for pneumatic tools
Never direct the air flow towards
yourself or any other person.
Thrashing hoses can cause griev-
ous injury. So always check that
the hoses and their fasteners
are undamaged and have not
detached.
Locking pins must be used on
universal swivel (jaw) couplings.
Whipcheck hose fasteners must be
used as protection against a fail-
ing hose–machine and hose–hose
connector.
Make sure that the maximum
pressure specified on the machine
is not exceeded.
Never carry pneumatic machines
by their hoses.
Use the device only for applica-
tions it has been designed for!
Do not overload the device.
Never use bottled hydrogen,
oxygen, carbon dioxide, or
other gases as an energy source:
these can cause explosions and
therefore serious injury.
DANGER! Keep your hands
and limbs away from rotating
parts. Otherwise, there is
danger of injury.
Make sure that the motor oil
SAE 10-20 is applied correctly
for the optimal lubrication of the
pneumatic device (see Section
“Operation” on page 31).
Contact with eyes or skin can
cause inflammation or irritation.
It is therefore important that the
motor oil is applied with great
care into the compressed air con-
nection on the pneumatic devices.
Warnings specific to the
pneumatic angle grinder
Before fitting a parting disc, after
every tool repair, and before
the first use of an angle grinder,
always check the speed dial and
make sure
that the angle grinder’s
actual idle speed at 6.3 bar does
not exceed the speed stamped or
printed on the type plate. Further-
more, all angle grinders in use
must be examined at least once
a shift.
Make sure that the parting disc
has been fitted correctly and
the parting disc nut tightened
securely. The parting disc should
not sit too tightly or too loosely.
Check that the speed specified
on the parting disc is at least
equal to the rated speed of the
pneumatic angle grinder.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292193 PDTS 6.3 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292193 PDTS 6.3 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info