746858

Parkside IAN 292193 PDTS 6.3 A1 Manual

29
Zoom out
Zoom in
Previous page
1/117
Next page
GB/IE/NI 29
Safety instructions for pneumatic tools
The pneumatic angle grinder must
be operated and serviced as
recommended in these instructions
if there is to be no unnecessary
increase to noise levels.
If the pneumatic angle grinder is
fitted with a silencer, always make
sure that this is in place and in full
working order when the machine
is operating.
The consumables / machine tools
must be selected, serviced, and
replaced in compliance with
the recommendations in these
instructions if there is to be no
unnecessary increase to noise
levels.
HAZARDS FROM VIBRATIONS
Vibrations can prove detrimental
to the nerves and blood circula-
tion in hands and arms.
When working in cold environ-
ments, wear warm clothing, and
keep your hands warm and dry.
If you start feeling numbness,
tingling, or pain in your fingers or
hands, or the skin of your fingers
or hands starts turning white, stop
work with the pneumatic angle
grinder, notify your employer, and
seek medical advice.
The pneumatic angle grinder must
be operated and serviced as
recommended in these instructions
if there is to be no unnecessary
increase to vibration levels.
Do not let the machine tool chatter
on the workpiece: this will in all
probability increase the vibrations
to a great extent.
The consumables / machine tools
must be selected, serviced, and
replaced in compliance with the
recommendations in these instruc-
tions if there is to be no unneces-
sary increase to vibration levels.
Whenever possible, use a column,
clamp, or balancing device to
hold the machine’s mass.
Keep a reliable, but not too tight
grip on the machine, noting the
force of your manual response:
vibration levels tend to increase
with tighter grips.
Use suitable intermediate wheels
with bonded abrasives.
ADDITIONAL SAFETY
INSTRUCTIONS FOR
PNEUMATIC MACHINES
Compressed air can cause
grievous injury.
When the machine is not in use
and before replacing accessories
or performing repairs, make sure
that the air supply has been shut
off, the air hose is unpressurised,
and the machine has been
disconnected from the air supply.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292193 PDTS 6.3 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292193 PDTS 6.3 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info