Manual Parkside IAN 292193 PDTS 6.3 A1 (page 27 of 117) (English, German, Dutch, French, Spanish)

746858

Zoom out

Zoom in

1/117

GB/IE/NI 27

 Before use, first inspect the

abrasive. Do not use parting discs

that may have been dropped or

that exhibit spalling, cracks, or

other defects.

 Make sure that before use the

parting disc has been secured

properly and tightened ade-

quately. The pneumatic angle

grinder must be operated for at

least one minute at idle speed in

a safe position. The machine must

be switched OFF immediately

there is considerable vibrations

or other damage, and their cause

identified.

 The spindle’s measurements and

other key data must be exam-

ined if there is to be no contact

between the end of the spindle

and the base of openings for

straight and flaring cup wheels or

threaded grinding rods designed

for mounting on machine spindles.

 In the case of parting discs

supplied with or designed for

use with adapters or adapter

bushings, the user must ensure

that the adapter or the adapter

bushing does not contact the face

side of the clamping flange and

that the clamping force generates

enough rotational drive to

prevent the parting disc from

slipping.

 If clamping flanges are provided

for a range of parting disc types

and sizes, always fit that clamp-

ing flange matching the parting

disc used.

 Before and after using the machine

tool, avoid direct contact: it may

still be hot or have sharp edges.

 The parting disc must be stored

and handled in accordance with

the manufacturer’s instructions.

HAZARDS AT THE WORKPLACE

 Slipping, tripping, and falling are

the predominant causes of injuries

at work. Take note of surfaces that

have become slippery through

the use of the machine and of

tripping hazards posed by the air

or hydraulic hose.

 Proceed carefully in unfamiliar

environments. There may be hid-

den dangers in the form of electric

or other supply cables.

 The pneumatic angle grinder is

not designed for use in potentially

explosive atmospheres and is not

insulated against contact with

electrical power sources.

 Make sure that there are no

electrical lines, gas piping, etc.,

that may pose a hazard in the

event of damage caused by the

machine in use.

Safety instructions for pneumatic tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292193 PDTS 6.3 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292193 PDTS 6.3 A1 Manual

Product: