746866
23
Zoom out
Zoom in
Previous page
1/90
Next page
PDSS 16 A1
20 
GB
IE
Additional safety notices
If applicable, observe special work safety or
accident prevention regulations for the handling
of compressors and compressed air tools.
Ensure that the maximum permissible working
pressure specified in the Technical Data is not
exceeded.
Do not overload this tool – use this tool only
within the capacity range specified in the
Technical Data.
Use safe lubricants. Ensure sufficient ventila-
tion at the place of work. In case of increased
discharge:
check the compressed air tool and have it re-
paired if necessary.
Do not use this tool if you are distracted. Be
alert, watch what you are doing and use com-
mon sense when operating a compressed air
tool. Do not use tools when you feel tired or are
under influence of drugs, alcohol, or medica-
tion. A moment of inattention when operating
the tool can result in serious personal injuries.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Keep compressed air tools out of reach of
children.
Do not store outdoors or in damp environments
without protection.
Protect the compressed air tool, in particular
the compressed air connection and operating
elements against dust and dirt.
Before use
NOTE
The compressed air tool may only be oper-
ated using cleaned, oil-atomised compressed
air and the maximum operating pressure of
6.3 bar must not be exceeded on the ap-
pliance. The compressor must be fitted with
a pressure reducer to regulate the working
pressure.
Wind Teflon tape
around all threaded
connectors.
Fitting the connector nipple
Wrap the threads on the connector nipple
with Teflon tape .
Screw the connector nipple
into the air
inlet .
Lubrication
NOTE
Regular lubrication is particularly important
to avoid friction and corrosion damage.
We recommend using a suitable special oil
for compressed air tools (e.g. Liqui Moly
compressor oil).
Lubrication with mist oiler
A mist oiler (not supplied) continuously
and optimally lubricates the appliance
as a preparation stage after the pressure
reducer. A mist oiler gives off fine drops
of oil into the air flow and thus guaran-
tees regular lubrication.
Manual lubrication
If you do not have a mist oiler, lubricate
the tool before every use or longer work
sessions. Add 3–4 drops of pneumatic
oil into the connector nipple
.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292167 PDSS 16 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292167 PDSS 16 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info