Manual Parkside IAN 292167 PDSS 16 A1 (page 21 of 90) (English, German, Dutch, French, Portuguese, Spanish)

746866

Zoom out

Zoom in

1/90

PDSS 16 A1

■ 18

│

Hazards in the workplace

■ Slipping, tripping up and falling are the main

causes of injuries in the workplace. Pay atten-

tion to surfaces that may have become slippery

from the use of the compressed air tool and

tripping hazards caused by air or the hydraulic

hose.

■ Proceed with caution in unknown surroundings.

Hidden hazards caused by power or other

supply lines may be present.

■ This compressed air tool is not suitable for use

in explosive atmospheres and is not insulated

against contact with power sources.

■ Make sure (e.g. by using a metal detector) that

there are no hidden power, water or gas lines

in the location where you are working.

Hazards caused by dust and vapours

■ The dusts and vapours produced by using the

machines for screw connections can be hazard-

ous to health (e.g. cause cancer, birth defects,

asthma and/or dermatitis); it is essential to

carry out a risk assessment in respect of these

risks and to implement corresponding regula-

tory mechanisms.

■ The risk assessment should include the dust

caused by using the machine and any existing

dust that may be raised at the same time.

■ The compressed air tool is to be operated and

maintained in accordance with the recommen-

dations contained in this manual to keep the

release of dust and vapours to a minimum.

■ The exhaust air should be extracted so that the

minimum amount of dust is raised in an already

dusty environment.

■ If dusts or vapours are created, the main priority

must be to control these at the site of their re-

lease.

■ All components of the compressed air tool or

accessories intended for collecting, extracting

or suppressing airborne dust or vapours or

should be used and serviced properly in ac-

cordance with the manufacturer’s instructions.

■ Consumables/tools should be selected, main-

tained and replaced in accordance with the

recommendations in this guide in order to avoid

unnecessary intensiﬁcation of dust or vapour

production.

■ Use a dust mask as per the instructions provided

by your employer or as required by health and

safety regulations.

■ Working with certain materials can lead to

emissions of dust and vapours that are poten-

tially explosive.

Hazards caused by noise

■ Excessive noise levels in conjunction with insuﬃ-

cient hearing protection may lead to permanent

hearing damage, loss of hearing and other

problems, such as tinnitus (ringing, buzzing,

whistling or humming in your ears).

■ It is essential to carry out a risk assessment with

regard to these hazards and implement suitable

control mechanisms.

■ Suitable control mechanisms include measures

such as the use of insulating materials to avoid

ringing noises from occurring on the work-

pieces.

■ Use hearing protection as required by work and

health safety regulations.

■ The compressed air tool is to be operated and

maintained in accordance with the recommen-

dations contained in these instructions in order

to reduce any unnecessary increase of the noise

levels.

■ Consumables and the tool should be selected,

maintained and replaced in accordance with

the recommendations in these instructions in

order to avoid any unnecessary increase of the

noise levels.

■ The integrated silencer may not be removed

and must be in good working order.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292167 PDSS 16 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292167 PDSS 16 A1 Manual

Product: