746866
24
Zoom out
Zoom in
Previous page
1/90
Next page
PDSS 16 A1
GB
IE
 21
Refilling oil
To ensure that the tool remains operational for
a long time, the tool must have a sufficient fill of
pneumatic oil.
You have the following options:
Attach a maintenance unit with an oiler to the
compressor.
Install an add-on oiler in the compressed air line
or the compressed air tool.
Add 3–5 drops of pneumatic oil into the con-
nector nipple
after every 15 minutes of
operation.
Connecting to a compressed air
source
NOTE
Before connecting the compressed air source,
the correct working pressure (3–6,3 bar)
must be fully reached, and
make sure that the trigger is in the upper
position.
Use only connection hoses with an internal
diameter of at least 9 mm.
Use only filtered, lubricated and regulated
compressed air.
Wrap the Teflon tape
around the con-
nector nipple before you screw it into the
compressed air tool. Wrap the tape as tightly
as possible around the thread. This lowers the
probability that air will escape and it optimises
the work process.
Screw the connector nipple
into the air inlet
. Tighten the connection with a pair of pliers.
Attach the tool to a compressor by connecting
the connector nipple
with the supply hose of
the compressed air source.
CAUTION!
Ensure that the compressed air hose is
firmly attached. A loose hose can thrash
about uncontrollably causing grave danger.
Likewise, ensure the firm seat of the two screw
connections between the coupling piece and
the appliance.
The compressed air source must be equipped
with a pressure reducer so that you can regulate
the air pressure.
Operation
Changing/inserting the tool/collet
chuck
CAUTION!
The shaft diameter of the tool must exactly
match the clamp bore of the collet chuck
/
(Ø 6.35 mm / 3.2mm)!
Hold the spindle
using the assembly tool .
Unscrew the collet chuck nut
from the thread
using the assembly tool .
Insert the tool into the collet chuck
/ .
Hold the spindle
using the assembly tool .
Tighten the collet chuck nut
using the assembly
tool .
Ensure the accessory tool is firmly attached.
CAUTION!
If no tool is inserted into the collet chuck
/
, do not tighten the collet chuck nut with
the assembly tool , screw it on by hand
only!
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292167 PDSS 16 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292167 PDSS 16 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info