Manual Parkside IAN 292167 PDSS 16 A1 (page 25 of 90) (English, German, Dutch, French, Portuguese, Spanish)

746866

Zoom out

Zoom in

1/90

PDSS 16 A1

■ 22

│

Switching on and oﬀ

Switching on:

♦ First, press the trigger lock

forwards and

then the trigger down to switch the tool on.

Switching oﬀ:

♦ Release the trigger

♦ When you have ﬁnished working, disconnect

the tool from the compressed air source.

Maintenance and cleaning

WARNING! RISK OF INJURY!

Disconnect the tool from the

compressed air supply.

CAUTION!

► Before maintenance, clean oﬀ any hazardous

substances that may have accumulated on

the tool (due to working processes). Avoid

all skin contact with these substances. If the

skin comes into contact with hazardous dusts,

this can lead to severe dermatitis. If dust is

produced or swirled up during maintenance,

it can be inhaled.

NOTE

► To ensure correct functioning and a long

service life for the tool, pay attention to the

following points:

■ Suﬃcient and continuous oil lubrication is highly

important for optimum functioning.

■ Check the speed and vibration levels after each

use.

■ Check the idle speed regularly and after any

maintenance is performed:

use a rev counter and perform the measure-

ment without any clamped tools. At a residual

pressure of 6.3 bar, the idle speed may not be

exceeded under any circumstances.

■ If the tool is exhibiting excessive vibration levels,

the cause of the vibrations must be identiﬁed

and repaired.

■ Use only the genuine replacement parts recom-

mended by the manufacturer, otherwise you

could put users at risk. In doubt, contact the

Service Centre.

■ Clean the tool with a soft, dry cloth only.

■ Never use sharp or abrasive cleaning agents

under any circumstances.

Troubleshooting

Fault Possible

cause

Remedy

Speed too

slow, air

escapes from

the outlet.

Motor parts

jamming due

to dirt.

Check the

pressure sup-

ply ﬁlter for

contamination.

Pressure sup-

ply too low.

Check the

pressure sup-

ply ﬁlter for

contamination.

Lubricate the

tool as de-

scribed in the

instructions.

If necessary,

repeat the

steps outlined

above.

Tool does

not move;

compressed

air escapes

completely

through the

outlet.

Motor is

jammed due

to material

build-up.

Lubricate the

tool as de-

scribed in the

instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292167 PDSS 16 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292167 PDSS 16 A1 Manual

Product: