748012
23
Zoom out
Zoom in
Previous page
1/87
Next page
PEH 30 C3
GB
IE
 19
External extraction:
When using dust extraction systems, e.g. a work-
shop extractor, it may be necessary to use the
adapter for external extraction
. The vacuum
cleaner must be suitable for the material being
processed.
Connecting:
Push the adapter for external extraction
firmly into the chip ejector .
Push the hose of a suitable dust extraction ap-
pliance (e.g. a workshop vacuum cleaner) onto
the chip ejector
(or the adapter for external
extraction , if required).
Removal:
Pull the hose of the vacuum cleaner off the chip
ejector
or the adapter.
Pull the adapter for external extraction
off.
Parking shoe (see fig. B)
The parking shoe allows you to put down the
appliance without risking damage to the work-
piece. While working, the parking shoe is
flipped up and rear part of the plane sole is
exposed.
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before applying
it to the workpiece.
Set desired cut depth.
Switch the appliance on.
Place the appliance with the front part of the
plane sole
on the workpiece.
Move the appliance with straight, even motions
over the workpiece.
Push forward slowly and do not exert excessive
pressure on the plane sole
. Excessive speed
reduces the surface finish and can lead to a jam
in the chip ejector.
Chamfering edges
The V grooves in the front plane sole allow
easy chamfering of workpiece edges.
Use the V groove that corresponds to the chamfer
width required.
Place the planer with the V groove
onto the
workpiece edge and guide it forwards.
Using the rip fence
The fit the rip fence, guide the connecting screw
8b
through the connecting piece
8a
and the rip
fence .
Screw the lock nut
onto the connecting
screw
8b
.
Fit the rip fence
onto the appliance using the
fastening screw .
Undo the lock nut
and set the desired width.
Retighten the lock nut
.
Ensure that the plane is applied with lateral
pressure.
Using the fold depth stop
Fit the fold depth stop onto the appliance
using the fastening screw
.
Set the desired fold depth using the fold depth
stop
.
Repeat the planing process several times until
the required fold depth is achieved.
Removing/replacing the planing
blade (see figs. C + D)
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
CAUTION!
There is a risk of injury due to the cutting edges
of the planing blade
!
Never touch the planing blade on its cutting
edges.
The planing blade has two cutting edges and
can be turned.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291791 PEH 30 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291791 PEH 30 C3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info