748012

Parkside IAN 291791 PEH 30 C3 Manual

24
Zoom out
Zoom in
Previous page
1/87
Next page
PEH 30 C3
■ 20 
│
 GB
│
IE
♦ Replace the planing blade
when both cutting
edges are blunt.
♦ Do not try to sharpen the planing blade
.
Turn the planing blade
or replace it.
NOTE
► Do not undo the two hex socket screws.
These are used for adjusting the height of
the cutter block. Adjustment is only required
if you are using a different type of planing
blade, e.g. a rustic blade.
When changing the blade, always replace
both blades to prevent an imbalance.
► First, unscrew only one blade. This will allow
you to orient your self on the factory-mounted
second blade when reassembling later.
♦ Use the supplied open-ended spanner
to
undo the 3 fastening screws for the planing
blade .
♦ Push the movable cutter block guard
into
the slot in the housing.
♦ Push the clamping element
upwards out of
the cutter block .
♦ Remove the tensioning plate
20a
from the clamp-
ing element . Remover the planing blade
from the clamping element .
♦ Fit either a new or turned blade in the reverse
order.
♦ Planing blades
can be purchased from the
address given below (see section “Service”).
Replacing the drive belt (see fig. E)
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance.
♦ Remove the screws
and detach the drive
belt cover .
♦ Remove the worn drive belt
.
♦ Fit the new drive belt
onto the small belt
wheel first and then turn the drive belt
and pull it onto the large belt wheel .
♦ Replace the drive belt cover
and fix it in
place using the screws
.
Maintenance and cleaning
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance.
♦ Keep the appliance and the ventilation slits
clean to ensure fault-free operation.
♦ Clean the chip ejector
regularly.
♦ To clean a blocked chip ejector, use a suitable
tool (e.g. a piece of wood, compressed air,
etc.).
♦ Use a dry cloth to clean the housing.
♦ Use a brush to remove any dust stuck to the
appliance.
♦ Never use sharp objects, petrol, solvents or
cleansers which can damage plastic. Do not
allow any liquids to get into the interior of the
appliance.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the ap-
pliance.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291791 PEH 30 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291791 PEH 30 C3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info