748012

Parkside IAN 291791 PEH 30 C3 Manual

22
Zoom out
Zoom in
Previous page
1/87
Next page
PEH 30 C3
■ 18 
│
 GB
│
IE
■ Dusts can be produced while working that
are hazardous to health, inflammable or
explosive. Wear a dust mask and use a suit-
able dust/chip extractor. Some dusts are carci-
nogenic.
■ When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate
external dust extraction appliance. Do not
use the power planer if the battery is dam-
aged. Damaged cables increase the risk of
electric shock.
■ Do not rest your hands next to or in front of
the appliance and the area being worked.
Otherwise, there is a risk of injury if you slip.
■ In case of danger, remove the plug from the
socket immediately.
■ Always remove the plug from the power socket
in event of danger, during work breaks, when
working on the appliance (e.g. when changing
planing blade).
■ Always route the power cord towards the
rear, away from the appliance.
■ Use only sharp planing blades.
■ Do not soak the materials or the area to be
worked with liquids containing solvents.
■ Avoid all contact with rotating parts.
■ Never use the appliance for other purposes
and only with original parts/accessories.
■ Hold the appliance firmly while working.
Ensure that your stance is secure and stable.
■ The appliance must always be kept clean,
dry and free from oil and grease.
Original accessories/auxiliary equip-
ment
■ Use only the auxiliary equipment and acces-
sories specified in the operating instructions.
Using parts or accessories other than those
recommended in the operating instructions can
lead to a risk of injury.
Operation
Switching on and off
Switching on:
♦ First, press the safety lock-out
.
♦ Then press and hold the ON/OFF switch
.
Switching off:
♦ Release the ON/OFF switch
.
NOTE
► For safety reasons, the ON/OFF switch
cannot be locked.
Setting the cut depth
Use the dial to set the cutting depth in stages from
0–3.0 mm according to the cut depth scale .
Dust/chip extraction (see fig.A)
WARNING!
Always wear a dust mask!
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance.
Adjustable chip ejector (left/right):
♦ Unlock the chip ejector
by turning it in
the opposite direction to the arrow (from the
“LOCK” position).
♦ Pull the chip ejector
out of the appliance.
♦ The chip ejector
can be attached to the
plane on the left or the right.
♦ Push the chip ejector
into the appliance.
♦ Lock the chip ejector
by turning it to the
position “LOCK”.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291791 PEH 30 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291791 PEH 30 C3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info