Manual Parkside IAN 285195 PDSP 1000 B2 (page 19 of 75) (English, German, Dutch, French, Portuguese, Spanish)

746433

Zoom out

Zoom in

1/75

│

15 ■

PDSP 1000 B2

Filling the blasting medium container

CAUTION!

► Before you open the screw cap

on the

blasting medium container

, or make any

other settings, the connection to the com-

pressed air hose must be disconnected and

all pressure completely discharged.

■ Use only suitable blasting media

for your

sandblasting work.

NOTE

► We recommend using a blasting medium

(ground blast furnace slag) with a grain size

of 0.2 mm–0.8 mm and which has been

shown not to cause silicosis.

■ Please ensure that the blasting medium

totally dry and not too coarse-grained.

NOTE

► The maximum grain size is 0.8 mm.

■ Open the screw cap

on the blasting medium

container by turning it anticlockwise.

■ Fill the required amount of blasting medium

into the blasting medium container .

■ Ensure that you do not exceed the maximum

ﬁll level for the container of 900 ml.

■ Afterwards, close the screw cap

on the

blasting medium container by turning it

clockwise.

NOTE REGARDING THE BLASTING

MEDIUM GRAIN SIZE

► The larger/coarser the grain size of the blast-

ing medium used, the coarser the dirt that can

be removed using it. The supplied material,

on the other hand, is ﬁne and thus more

suitable for the removal of items such as paint

or rust ﬁlm. The ﬁne material also causes less

damage to the surfaces being treated, meaning

a choice can be made regarding these.

For coarse rust, for example, it is best to use

a coarser-grained blasting medium which you

can buy online (see section "Importer") or in

any good specialist retailer. Please observe

the guidelines regarding maximum grain size.

Mount the collecting bag for sand-

blasting material

■ Use a screwdriver to attach the collecting bag

to the appliance with the supplied screw clip

Select and ﬁtting attachments

■ Start by selecting the appropriate attachment

for the job at hand ( , , , ).

■ Push the selected attachment ﬁrmly onto the jet

nozzle , ensuring that no air can escape from

the sides.

Using the compressed air sandblaster

gun

■ Carefully prepare the workpiece that is to be

blasted.

Clean it if necessary.

NOTE

► Layers of dust or fat will signiﬁcantly impair

the results.

■ Carefully cover or mask everything that is not to

be blasted.

■ The distance between the attachment and the

surface being worked plays an important role

and should be kept as low as possible so that

the blasting medium

can be collected by the

collecting bag .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285195 PDSP 1000 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 285195 PDSP 1000 B2 Manual

Product: