746433
18
Zoom out
Zoom in
Previous page
1/75
Next page
14 
GB
IE
PDSP 1000 B2
RISK OF EXPLOSION! The compressed air
sandblaster gun should not be used in areas
with gas/open flames/fire/gas-operated
water heaters.
SMOKING PROHIBITED!
Work only in sufficiently ventilated rooms.
Do not use oxygen or any combustible gas as
an energy source.
Never exceed the maximum operating pressure
of 6.3 bar.
WARNING!
KICKBACK FORCES! At high working pres-
sures, kickback can occur which can, under
certain circumstances, lead to danger due to
continuous loads.
RISK OF INJURY! Disconnect the appliance
from the compressed air source before starting
any repairs or maintenance work and before
transportation.
RISK OF INJURY! Disconnect the appliance
from the compressed air source before refilling
the blasting medium.
NOTE
Please heed the safety instructions provided
by the manufacturer of the blasting medium.
Use only materials that are suited for use in the
compressed air sandblaster gun . Do not
use quartz sand. This can lead to a dangerous
build-up of silicosis-inducing dust.
Take steps to ensure that others are not incon-
venienced (dust formation).
Ensure that the blasting medium is collected so
that it can be disposed of in an environmentally
friendly manner.
Do not remove any type plates. These contain
important information for the safe operation of
the appliance.
If you are inexperienced with the appliance,
seek training in how to use it safely.
WARNING! TOXIC DUST!
Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
CAUTION!
Ensure that the appliance is disconnected
from the air supply when not in use, when ex-
changing accessories or during repair work.
The air hose should not be under pressure.
Operation
Connecting the compressed air supply
NOTE
The compressed air sandblaster gun
may
only be operated on cleaned, condensate-
and oil-free compressed air and may not
exceed the maximum operating pressure of
6.3 bar at the appliance.
To ensure that you can regulate the air pres-
sure, the compressed air source should be
equipped with a (filter) pressure reducer.
Connect the compressed air sandblaster gun
to a suitable compressed air source by attaching
the quick-connect coupling on the supply hose
to the nipple on the sandblaster gun .
The connection locks automatically.
NOTE
Ensure that the control dial
is set to "0"
before connecting the appliance to the com-
pressed air source.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285195 PDSP 1000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285195 PDSP 1000 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info