746433
17
Zoom out
Zoom in
Previous page
1/75
Next page
GB
IE
 13
PDSP 1000 B2
Noise emission value:
Noise measurement value determined in accord-
ance with EN 1265.
The A-rated noise level of this compressed-air tool
is typically:
Sound pressure level: L
pA
= 90.5 dB(A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 101.5 dB(A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Vibration emission value:
Vibration values determined in accordance with
EN ISO 20643:
a
h
= ≤ 2.5 m/s
2
WARNING!
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure speci-
fied in EN ISO 20643 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
The vibration level varies in accordance with
the use of the compressed air tool and may
be higher than the value specified in these
instructions in some cases. It is easy to under-
estimate the vibration load if the compressed
air tool is used regularly in a certain manner.
NOTE
For an accurate estimate of the vibration load
during a specific working period, the periods
during which the appliance is switched off or
is running but not actually being used must
also be taken into consideration. This can
significantly reduce the vibration load over
the total working period.
General safety
information
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
Workplace safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Appliance
can create sparks which may ignite the dust or
fumes.
b) Keep children and bystanders away while
operating a tool. Distractions can cause you to
lose control.
Device-specific safety instructions for
compressed air sandblasters
Check the appliance for any possible defects
before use. If the appliance exhibits any faults,
it should not be used under any circum-
stances.
Keep children and bystanders away while
operating the tool. Distractions can cause you
to lose control.
RISK OF INJURY! MISUSE! Do not point the
tool towards people or animals!
Wear a dust mask!
Wear safety goggles!
Wear protective gloves!
Wear suitable protective clothing.
WARNING!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285195 PDSP 1000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285195 PDSP 1000 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info