Manual Parkside IAN 280366 PTSG 140 A1 (page 19 of 75) (English, German, Dutch, French, Portuguese, Spanish)

746151

Zoom out

Zoom in

1/75

│

15 ■

PTSG 140 A1

■ Check that all moving parts work properly with-

out jamming and whether parts are damaged.

All parts must be properly ﬁtted and meet all

the conditions to ensure the proper operation of

the power tool. Damaged safety devices and

parts must be properly repaired or replaced by

a specialist workshop unless otherwise indicat-

ed in the instructions.

■ Damaged switches must be replaced at an

authorised customer service centre.

■ Do not use any power tools that you cannot

switch on and oﬀ with the power switch.

CAUTION! The use of other tools and accesso-

ries could lead to an increased risk of personal

injury for you.

■ Have your power tool repaired by a qualiﬁed

electrician! This power tool complies with all

relevant safety regulations. Repairs may only

be performed by a qualiﬁed electrician using

original spare parts. Failure to do so could put

the user at risk of accidents.

Residual risks

Even if you operate this power tool properly, there

will still be residual risks. The following risks can

occur in relation to the power tool’s design and

structure:

▯ Lung damage, if no suitable breathing protec-

tion is worn.

▯ Hearing damage, if no suitable hearing protec-

tion is worn.

▯ Damage to health caused by vibrations if the

appliance is used for extended periods or is

not properly used and maintained.

WARNING!

■ The power tool creates an electromagnetic

ﬁeld during operation. This ﬁeld can, in cer-

tain circumstances, impair active or passive

medical implants. To reduce the risk of fatal

injuries, we recommend that people with

medical implants consult their doctor and the

manufacturer of the medical implant before

operating this machine.

Before use

CAUTION!

■ This appliance is not designed for continuous

operation.

– If the appliance overheats, switch it oﬀ and

allow it to cool down.

Appliance position

■ The appliance can be set horizontally or verti-

cally.

♦ Fix the supplied screw clamp

using the screw

clamp mounting to a table edge to prevent

the appliance tipping over.

Assembling/disassembling the

sanding table with sanding table

holder

♦ Undo and remove the hex socket screw and

the plain washer underneath the sanding

table holder .

♦ Now pull the sanding table holder

together

with the sanding table oﬀ towards the front.

♦ To reﬁt the sanding table

, push the sanding

table holder with the sanding table back

into the normal position.

♦ After this, reinsert the hex socket screw

and

the plain washer and tighten the screw.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280366 PTSG 140 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 280366 PTSG 140 A1 Manual

Product: