746151
21
Zoom out
Zoom in
Previous page
1/75
Next page
GB
IE
 17
PTSG 140 A1
Operation
Switching on and off
NOTE
Before first use, allow the sanding paper
to run without a load at top speed for about
5 minutes. Keep out of the danger area.
To switch the appliance on, plug the mains
plug
into a wall socket and press the on/off
switch “I”.
Now set the required sanding paper speed
using the speed control
on the side of the
appliance. The speed is infinitely variable.
To switch the appliance off again press the on/
off switch
“0” and pull the mains plug
out of the power socket.
Grinding
The arrow on top of the appliance ( ) shows you
the sanding disc rotation direction (in this case,
anticlockwise).
The sanding speed can be adjusted using the speed
control
on the side of the appliance. This allows
you to process the material optimally according to
your requirements.
WARNING!
HAZARDOUS WORKING AREA: The grey
working area of the grinding wheel. Do not
work in this area (see fig. A).
Danger!
Safe
Fig. A
Maintenance and care
Ensure that the appliance has been disconnected
from the power in order to prevent it from being
accidentally switched on during the replacement
process and causing injuries.
The appliance is maintenance-free.
Always clean the appliance directly after com-
pletion of work.
Use a dry cloth to clean the housing. Under no
circumstances should you use fuel, detergents,
solvents or abrasive cleaners.
Keep the ventilation openings free of obstruc-
tions at all times.
Remove any sanding dust stuck to the appliance
with a brush.
Disposal
The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
In accordance with European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment and
its integration into national law, used power tools
must be disposed of separately and recycled in an
environmentally friendly manner.
Your local community or municipal authorities
can provide information on how to dispose of the
appliance.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280366 PTSG 140 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280366 PTSG 140 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info