746151
17
Zoom out
Zoom in
Previous page
1/75
Next page
GB
IE
 13
PTSG 140 A1
Total vibration value:
Total vibration value as per EN 61029:
Vibration emission value: a
h
≤ 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
The vibration level will vary according to the
use of the power tool and may sometimes
be higher than the value specified in these
instructions.
Regular use of the power tool in this way may
cause the user to underestimate the vibration.
To estimate the vibration load during a specif-
ic working period accurately, periods during
which the appliance is switched off (or run-
ning, but not being used) must also be taken
into account. This can significantly reduce the
vibration load over the total working period.
General Power Tool
Safety Warnings
CAUTION!
Read all the safety information, instructions,
illustrations and technical data provided
with this electric tool. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-
operated (cordless) power tool.
Working safely
Keep your workspace tidy. Clutter in the work
area can cause accidents.
Take account of environmental influences!
Do not expose the power tool to rain. Do not
use the power tool in wet or moist environments.
Ensure that your workspace is adequately lit.
Do not use power tools where there is a risk of
explosion or fire.
Protect yourself from electric shocks! Avoid
body contact with grounded surfaces (e.g.
pipes, radiators, electric cookers, refrigerators
and freezers).
Keep other people at a distance! Do not allow
other people, especially children, to touch the
power tool or the cord. Keep them out of your
work area.
Store unused power tools safely! Unused
electric tools should be placed in a dry, high-up
or closed-off place out of the reach of children.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280366 PTSG 140 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280366 PTSG 140 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info