746151
18
Zoom out
Zoom in
Previous page
1/75
Next page
14 
GB
IE
PTSG 140 A1
Do not overload your power tool! The tool
will work better and more safely in the specified
performance range.
Use the right power tool for the job! Do not
use low performance tools for heavy duty work.
Do not use the power tool for purposes for which
it is not intended. For example, do not use a
circular saw to cut tree branches or logs.
Wear suitable clothing! Do not wear loose
clothing or jewellery to avoid getting them
caught in moving parts. Wear non-slip footwear
when working outdoors. If you have long hair,
wear a hairnet.
Use protective equipment!
Wear safety goggles.
Use a breathing mask for work which
produces a lot of dust.
Connect the dust extraction unit! If there are
connections for dust extraction and collection,
make sure that these are connected and used
properly.
Do not use the cord for purposes for which
it is not intended! Do not pull on the cord to
unplug the power tool. Protect the cord from
heat, oil and sharp edges.
Secure the workpiece! Use clamps or a vice to
hold the workpiece firmly in place. This is much
safer than simply holding it in your hand.
Do not overreach! Keep both feet on the
ground an maintain your balance at all times.
Maintain tools with care! Keep the cutting tools
sharp and clean to be able to work better and
more safely. Follow the instructions on lubrica-
tion and exchanging tools. Check the power
cord regularly and have it replaced by a certi-
fied specialist if it is damaged. Check extension
leads regularly and replace them if they are
damaged. Keep the handles dry, clean and free
from oil and grease.
Unplug the appliance from the mains socket!
When the power tool is not in use, before main-
tenance and when changing tools such as saw
blades, drill bits and milling tools.
Never leave any tool key attached! Check
that all keys and adjusting tools are removed
before switching the appliance on.
Avoid accidentally starting the appliance!
Ensure that the switch is switched to off before
inserting the plug into the wall socket.
Use the extension cord for outdoor use! Use
only suitably certified and labelled extension
cords outdoors.
Remain alert at all times! Pay attention to what
you are doing. Proceed with caution when
working with the tool. Do not use the power
tool when distracted.
Check the power tool for any damage!
Before continuing to use the power tool, check
all safety devices and any slightly damaged
parts to make sure they function properly and
as intended.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280366 PTSG 140 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280366 PTSG 140 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info