745937

Parkside IAN 280251 PEH 30 B2 Manual

11
Zoom out
Zoom in
Previous page
1/53
Next page
11GB / IE / NI
socket.
Planing debris removal port (right /
left selectable):
□
Release the planing debris removal port 3
by turning it into the “Lock-off” position
along the direction of the arrow.
□
Pull the planing debris removal port 3 out
of the device.
□
The planing debris removal port 3 can be
set to face left or right in the planer.
□
Push the planing debris removal port 3
into the device.
□
Lock the planing debris removal port
3 by turning it into the “Lock” position
along the direction of the arrow.
External vacuum extraction:
If necessary fit the vacuum cleaner adapter
when using a dust extraction system, e.g.
a workshop dust extraction system.
The vacuum cleaner / dust extraction device
used must be suitable for the material being
planed.
Connection:
□
Place the vacuum cleaner adapter
firmly on to the planing debris removal
port
.
□
Push the hose of a suitable dust extraction
device approved for that purpose (e.g.
a workshop vacuum cleaner) on to the
planing debris removal port
or the
vacuum cleaner adapter .
Removal:
□
Pull the hose of the dust extraction device
off the planing debris removal port
or
off the vacuum cleaner adapter .
□
Pull off the vacuum cleaner adapter ,
if fitted.
●
Parking shoe (see Figs. B / C)
The parking shoe allows you to lay the
device down without the risk of damaging
the workpiece.
When planing, the parking shoe swings
up and exposes the rear part of the sole
.
●
The planing process
■
CAUTION! DANGER OF KICKBACK!
Always switch on the device before
placing it against the workpiece.
□
Set the required cutting depth.
□
Switch on the device.
□
Always place the front part of the sole
down first on to the workpiece.
□
Guide the device with even forward
movement over the surface being planed.
□
Move the device forward at a slow rate
and ensure that the contact pressure acts
evenly on the sole
. Moving forward at
too great a rate results in a poorer surface
quality and can lead to blocking of the
planing debris removal port.
●
Chamfering edges (see Fig. H)
The V-grooves
10
in the front sole
9
allow
the device to be used for simple chamfering
of workpiece edges.
□
Use the V-groove most appropriate to your
desired chamfer width.
□
Place the planer with the V-groove on
the workpiece edge and guide the planer
along the edge.
●
Using the guide fence
(see Fig. I)
□
Attach the guide fence
6
to the device
with the fixing screw
.
□
Release the fixing nut
8
and set the
guide at the desired distance.
□
Retighten the fixing nut
8
.
Preparing for use
3
3
3
3
3
3
3
3
7
9
9
9
10
15
15
15
15
15
16
16
3 by turning it into the “Lock” position
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280251 PEH 30 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280251 PEH 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info