Manual Parkside IAN 280251 PEH 30 B2 (page 9 of 53) (English, German, Dutch, French)

745937

Zoom out

Zoom in

1/53

9GB / IE / NI

are dangerous in the hands of untrained

users.

e) Maintain power tools. Check

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power tool

repaired before use. Many accidents

are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed. Use

of the power tool for operations different

from those intended could result in a

hazardous situation.

5. Service

a) Have your power tool serviced by

a qualified repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

●

Safety advice relating

specifically to power planers

■

Wait until the blade shaft has

completely stopped moving

before you put the device down.

An exposed blade shaft may catch on

the surface and lead to loss of control or

serious injury.

■

Do not place your fingers in the

planer debris removal port .

Danger of injury from rotating parts.

■

Always switch on the device before

placing it against the workpiece.

Otherwise the device could kick back

if the planer blade gets snagged in the

workpiece.

■

When working always keep the

sole flat against the workpiece.

Otherwise you could be injured if the

plane tilts.

■

Never plane over metal objects.

Otherwise the planer blade / blade shaft

could be damaged.

■

Secure the workpiece. Use clamps or

a vice to grip the workpiece firmly. This

is much safer than holding it with your

hand.

■

Do not plane materials containing

asbestos. Asbestos is a known

carcinogen.

■

The dust generated while planing

could be hazardous to health,

inflammable or explosive. Wear a

dust mask and use a suitable dust / debris

vacuum extraction device. Some dusts are

known carcinogens.

■

When planing wood for long

periods and in particular when

working on materials that give

rise to dusts that are hazardous

to health, the planer must be

connected to a suitable external

dust extraction device.

■

Do not use the power planer if its

mains lead is damaged. Damaged

mains leads increase the risk of electric

shock.

■

Never support yourself by placing

your hands near or in front of

the device or on the workpiece

surface. If you slip you could be injured.

■

If a dangerous situation arises, pull

the mains plug immediately out of

General power tool safety warnings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280251 PEH 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 280251 PEH 30 B2 Manual

Product: