745937

Parkside IAN 280251 PEH 30 B2 Manual

7
Zoom out
Zoom in
Previous page
1/53
Next page
7GB / IE / NI
Introduction / General power tool safety warnings
Wear ear protection!
Vibration emission value:
Main handle: ah=1.939 m/s
2
auxiliary handle: ah=2.719 m/s
2
Uncertainty K = 1.5 m / s
2
The vibration level specified
in these instructions was measured in
accordance with an EN 60745 standardised
measurement process and can be used
to compare equipment. The vibration
emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according
to the application of the electrical tool an in
some cases may exceed the value specified
in these instructions. Regularly using the
electric tool in such a way may make it easy
to underestimate the vibration.
Note:
If you wish to make an accurate
assessment of the vibration loads
experienced during a particular period of
working, you should also take into account
the intervening periods of time when the
device is switched off or is running but is
not actually in use. This can result in a much
lower vibration load over the whole of the
period of working.
●
General power tool
safety warnings
Wear ear protection
Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and / or serious injury.
Save all warnings and instructions
for future reference!
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
2. Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280251 PEH 30 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280251 PEH 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info