745937

Parkside IAN 280251 PEH 30 B2 Manual

10
Zoom out
Zoom in
Previous page
1/53
Next page
10
GB / IE / NI
the mains socket.
■
When taking a break from your
work, before carrying out any
tasks on the device itself (e.g.
changing the plane blade) or when
you are not using the device,
always pull the mains plug out of
the mains socket.
■
Always work with the mains lead
leading away from the rear of the
device.
■
Use sharp planer blades only.
■
Do not soak the materials or the
surface you are about to work on
with liquids containing solvents.
■
Avoid contact with rotating parts.
■
Never use the device for a purpose
for which it was not intended
or with non-original parts /
accessories.
■
Hold the device securely when
working. Ensure that you are standing
in a stable, well-balanced position.
■
Always keep the device clean, dry
and free from oil or grease.
●
Safety instructions for planers
■
Wait for the cutter spindle to stop
completely before setting down the power
tool. An exposed rotating cutter spindle
can catch on the surface, resulting in loss
of control and serious injuries.
■
Only hold the power tool by the insulated
handle areas as the cutter spindle may
touch the tool‘s mains cable. Contact with
a live wire could cause metal parts of the
device to become live and lead to electric
shock.
■
Fix and secure the work piece to a stable
surface using clamps or other means.
When only securing the work piece by
hand or against your body it will remain
unstable, which could lead to loss of
control.
●
Original accessories /
attachments
■
Use only the accessories and
attachments detailed in the
operating instructions. The use of
attachments or accessories other than
those recommended here could lead to
you suffering an injury.
●
Preparing for use
●
Switching On / Off
Switching on:
□
First press the safety lock-out .
□
Then press and keep pressed the ON /
OFF switch
.
Switching off:
□
Release the ON / OFF switch .
Note: For safety reasons the ON / OFF
switch cannot be locked in the ON
position.
●
Setting the cutting depth
The rotary control can be used to set
the cutting depth in steps from 0–3.0 mm
according to the cutting depth scale .
●
Vacuum extraction of dust /
debris (see Fig. A)
Wear a dust mask!
DANGER OF INJURY!
Before you carry out any work on the device
always pull the mains plug out of the mains
General power tool safety warnings /Preparing for use
1
2
2
2
13
14
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280251 PEH 30 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280251 PEH 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info