Manual Parkside IAN 275671 PDSS 310 A2 (page 10 of 69) (English, German, Dutch, Danish, French)

745544

Zoom out

Zoom in

1/69

11 GB/IE

Safety instructions for air tools / Commissioning

Hazard due to vibration

Exposure to vibration may cause damage to

the nerves and disturb blood circulation in hands

and arms.

Keeps hands away from the sockets of hex nut

drivers.

Wear warm clothes when working in cold envi-

ronments and keep hands warm and dry.

If you notice your skin on ﬁngers or hands beco-

ming numb, tingling, hurting or becoming white,

stop working with the machine and consult a

physician.

Operate and maintain the machine for screw

connections as recommended in this manual to

prevent an unnecessary increase in vibration.

Do not use work or poorly ﬁtting sockets or ex-

tensions, as these are very likely to signiﬁcantly

increase vibration.

Select, maintain and replace consumables and

machine tools as recommended in these in-

structions to prevent an unnecessary increase

in vibration.

When possible use socket ﬁttings.

Whenever possible, use a stand, clamp or an

equaliser to support the weight of the machine.

Do not grip the machine too tightly but ﬁrmly,

maintaining the necessary hand reaction forces,

as the vibration hazard typically increases when

tightening the grip.

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious injuries.

- Always close the air supply, release pressure

from the hose, and disconnect the machine

from the compressed air supply when the ma-

chine is not in use, before switching accesso-

ries or when performing repairs.

- Never aim the air ﬂow at yourself or others.

Hoses ﬂapping about can result in serious inju-

ries. Therefore always inspect hoses and their

fasteners for damage and a secure ﬁt.

Direct cold air away from hands.

Do not use quick-release couplings on the tool

intake of impact- and impulse drivers. Only use

connectors made from hardened steel (or ma-

terial with comparable impact resistance) on

threaded hose connections.

If using universal swivel couplings (coupling

discs) always use locking pins and use whip-

check hose safety cables for protection in the

event the connection between the hose and the

machine or in between hoses fail.

Be sure not to exceed the maximum pressure

speciﬁed on the machine.

In torque controlled machines with continuous

rotation the air pressure has a safety-related

impact on the output. Therefore hose length

and diameter requirements must be determined.

Never carry pneumatic tools by the hose.

Commissioning

Note: the device is operational after installing the

plug nipple.

Inserting the socket

wrench or bit

ATTENTION! Always install the desired

socket key before connecting the tool to your

compressed air system. Always disconnect the

compressed air supply from the compressed air

connection

before attaching or changing

socket keys

Insert the correct socket

, if necessary with

extension

, in the drive.

Slide the socket attachment

onto the

square

of the drive.

Be sure the snap ring is locked into the notch of

the socket attachment

Only use socket attachments

sizes ½“ spe-

ciﬁed in ﬁgure A.

Be sure the socket attachments

used are

not damaged. Never use damaged or the

wrong size (not suitable) socket attachments

Safety instructions for air tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275671 PDSS 310 A2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275671 PDSS 310 A2 Manual

Product: