Manual Parkside IAN 275671 PDSS 310 A2 (page 9 of 69) (English, German, Dutch, Danish, French)

745544

Zoom out

Zoom in

1/69

10 GB/IE

Safety instructions for air tools / CommissioningSafety instructions for air tools

Risks associated with

accessories

Disconnect machine from the power supply be-

fore changing a tool or accessory.

Do not touch collets or accessories whilst impact

driving, as doing so may increase the risk of

cuts, burns or injuries from vibration.

Only use accessory and material sizes and

types recommended by the manufacturer for

screw joints, do not use other accessory and

material types and sizes.

Only use impact sockets in good working con-

dition as manual sockets and accessories in

poor working condition may break and be

ejected when used with impact drivers.

Hazards in the work

environment

Slipping, tripping and falls are main causes of

injuries at the workplace. Be mindful of surfaces

which may have become slippery during ma-

chine use, and of tripping hazards caused by

the air- or hydraulic hose.

Proceed with caution in unfamiliar surroundings.

These may hold hidden dangers due to electri-

cal cables or supply lines.

The machine for screw connections is not suita-

ble for use in explosive environments and is not

insulated against contact with electrical power

sources.

Verify there are no electrical lines, gas lines,

etc. which may result in a hazard in the event

they are damaged during machine use.

Hazards due to dust

and vapours

Dusts and vapours generated by use of machines

for screw connections may result in damage to

the health (e.g. cancer, birth defects, asthma

and / or dermatitis); it is imperative to perform

a risk assessment for these hazards and imple-

ment the respective regulatory mechanisms.

The risk assessment should include dust genera-

ted from machine use and dust in the area pos-

sibly being blown around.

Exhaust air must be discharged so the amount

of dust being blown about in a dusty environ-

ment is minimised.

If dust or vapours are generated the principal

task must be to monitor them in the area where

they are released.

All machine mounting parts or accessories in-

tended to collect, extract or eliminate airborne

dust or vapours should be used and maintained

according to manufacturer instructions.

Use respiratory protection.

Noise hazards

With inadequate ear protectors the impact of

high noise levels may result in permanent hea-

ring damage, hearing loss and other problems,

e.g. tinnitus (ringing, whistling or buzzing in the

ear).

It‘s imperative to perform a risk assessment for

these hazards and implement the suitable regu-

latory mechanisms.

Suitable regulatory mechanisms to minimise the

risk include measures such as using insulation

to prevent pinging sounds on work pieces.

Use hearing protection.

The machine for screw connections must be

operated and maintained as recommended in

these instructions to prevent an unnecessary in-

crease in the noise level.

If the machine for screw connections features

a silencer, always ensure it is available when

using the machine for screw connections and in

good working order.

Select, maintain and replace consumables and

machine tools as recommended in these instruc-

tions to prevent an unnecessary increase in the

sound level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275671 PDSS 310 A2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275671 PDSS 310 A2 Manual

Product: