Manual Parkside IAN 275671 PDSS 310 A2 (page 12 of 69) (English, German, Dutch, Danish, French)

745544

Zoom out

Zoom in

1/69

13 GB/IE

Commissioning / After initial use / Maintenance / Cleaning and Care

Correctly holding the

equipment

This equipment weighs 2.1 kg.

Hold the equipment with both hands to ensure

safe operation (see Fig. D).

After initial use

Once the task has been ﬁnished the device must be

disconnect from the compressed air supply

Switch oﬀ the compressor.

Brieﬂy activate the trigger

of the equipment

to release any residual compressed air.

Now pull back the safety on the connection

coupling of your compressed air hose.

Now remove the hose from the plug nipple

Careful when putting the

device down. Always put down the device so it

does not rest on the trigger. This could potenti-

ally result in inadvertent activation of the tool,

which in turn could result in hazards.

Maintenance

ATTENTION! All maintenance must be per-

formed by trained individuals. Follow the speciﬁed

maintenance instructions to ensure a long life and

proper operation of this quality product.

Disconnect equipment from the compressed air

source when performing maintenance and care.

Check the condition of wear and tear items

and accessories with each maintenance.

Note: Daily cleaning and regular lubrication

are an absolute necessity for smooth operation.

Only use special tool oil with a high viscosity

(thin ﬂuid). Oil for compressed air tools or

SAE10-20 motor oil are suitable.

ATTENTION! Do not use other (especially

high viscosity) lubricants. Malfunctions or per-

manent damage may otherwise occur.

The following lubricating options are

available:

a) via the lubricator

Fill the lubricator included

with a bit of oil

by ﬁrst unscrewing the inlet screw from the lu-

bricator.

Now install the lubricator

in the compressed

air supply as described in chapter „Establishing

connections”.

b) via oil-mist generator

If a complete maintenance unit with oil-mist

generator is installed on your compressor the

lubricator

does not necessarily need to be

mounted.

To use the oil-mist generator plug the plug

nipple

directly into the equipment and con-

nect with your air hose.

c) by hand

Alternatively you can also manually lubricate

your equipment (not recommended).

To do so, remove the screw plug on the oil ﬁller

port

Apply 3–5 drops of oil to the compressed air

connection and the oil ﬁlling port

before

using the compressed air tool.

If the air tool has not been used for several

days 5–10 drops of oil must be added to the

air connection

and the oil ﬁller port

Note: Regular lubrication is imperative to ensure

the longest possible life for your compressed air de-

vice. We recommend continuous lubrication via the

included lubricator

Always store your air tools / equipment in dry

locations.

No maintenance is required beyond the above

lubrication and cleaning.

Cleaning and Care

Only clean the tool with a dry cloth.

Never clean with ﬂuids such as petrol, solvents

or water.

Do not allow liquids to enter the equipment.

Commissioning

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275671 PDSS 310 A2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275671 PDSS 310 A2 Manual

Product: