Manual Paradyne FrameSaver NP 110 (page 55 of 175) (English)

458602

Zoom out

Zoom in

1/175

4 Operation

4-14 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B

November

2000

Frame Manager

Configuration

The Frame Manager Configuration screen allows you to view and alter parameters for

Frame Manager operations.

The Frame Manager Configuration screen is shown in Figure 4-5.

ure 4-5 Frame Mana

er Confi

uration Screen

1. WAN Mgmt DLCI - Displays the current DLCI value of the private network PVC

or Tunneled PVC for WAN management of the FrameSaver NP 110, as stored in

the unit’s non-volatile memory (NVM). Enter the DLCI number only, for private

network PVC. Preface the DLCI number with “T” for tunneled PVC. Preface the

DLCI number with “D” to have the WAN Mgmt IP Address relearned each time

the PVC returns to an “active” condition.

2. P/C Mgmt DLCI - Sets or disables the direction and PVC for Payload/CPE

management access to the FrameSaver NP 110. The first letter (P or C) determines

which direction, and the remainder indicates the DLCI value.

NOTE: The P/C Mgmt DLCI value must NOT be the same as WAN Mgmt DLCI.

CAUTION

If either WAN or P/C M

mt DLCI value is chan

ed, the

FrameSaver NP 110 will perform a system reset after the

Save [SA] command is issued. The system reset will

terminate any console session in pro

ress and interrupt

data traffic.

3. LMI Protocol - Displays and allows the selection of the LMI protocol used. If set

to “None,” LMI traffic (if any) to or from the Network will be passed through the

FrameSaver NP unaffected, and the unit’s LMI alarms and status will be cleared.

4. Network (DTE) - Consists of the settings required for the various protocols. These

include T391, N392, N393 and N391.

************************** Frame Manager Configuration *************************

Name: F@43802

LMI Protocol [P=]

WAN Mgmt DLCI [D=#,T#orD#]: Disabled 1) None 3) "LMI"

P/C Mgmt DLCI [E=P#orC#]: Disabled >>2) ANSI"D" << 4) ITU"A"

X to Disable or 16 thru 991

------------- Network ------------ -------------- User --------------

T391/Status Enq Rate [S1=#]: 10 T392/Status Enq Timeout [S2=#]: 15

5 thru 30 seconds 5 thru 30 seconds

N392/Event Err Thres [T1=#]: 3 N392/Event Error Thres [T2=#]: 3

N393/Event Count [C1=#]: 4 N393/Event Count [C2=#]: 4

1 thru 10 1 thru 10

N391/Full Status Freq [F1=#]: 6 Force Full Status Response [F2=]

1 thru 255 >>1) Disable<<

2) Enable

PVC BECN/FECN Thres [B=#]: Disabled

X to Disable or 1 thru 895 seconds

Link Err Thres [L1=#]: Disabled Link Err Thres [L2=#]: Disabled

X to Disable or 1 thru 895 seconds X to Disable or 1 thru 895 seconds

Help[?] Save[SA] Cancel[X]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Paradyne FrameSaver NP 110 Manual

Product: