523151
101
Zoom out
Zoom in
Previous page
1/108
Next page
Frequently Asked Questions
FAQs, etc.
101
Problem Actions
HDMI
Sound is unusual
Set the sound setting of the connected equipment to
“2ch L.PCM”.
Check the “HDMI1 / 2 / 3 / 4 Input” setting in the Sound Menu. (p. 33
)
If digital sound connection has a problem, select analogue sound
connection. (p. 97)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Check the HDMI cable is connected properly. (p. 92)
Turn the TV and equipment Off, then turn them On again.
Check an input signal from the equipment. (p. 97)
Check the output resolution of the equipment.
Use equipment compliant with EIA/CEA-861/861B.
Network
Cannot connect to the network
Check the LAN cable or Wireless LAN Adaptor is connected
properly. (p. 75)
Check the connections and settings. (p. 75 - 79)
Check the network equipment and network environment.
The router may not be set to issue IP address automatically. If the
network administrator prefers to allocate an IP address, set an IP
address manually. (p. 77)
The router may be using MAC address filtering (security setting).
Confirm the MAC Address of this TV (p. 76) and set the router to be
able to use it.
If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the file during
DLNA operations
Is media server of the connected equipment prepared? (p. 74)
Check applicable data format. (p. 74)
Cannot operate VIERA CAST
Check the connections and settings. (p. 75 - 79)
The server or connected line might be busy now.
Other
The TV does not switch On
Press and hold the standby On / Off switch on the remote control
for about 1 second if Power LED is red.
Check the mains lead is plugged into the socket.
The fuse in the mains plug may have blown. Replace it with one of
an identical rating (p. 4).
The TV goes into Standby mode
Auto power standby function is activated. (p. 9)
The TV enters Standby mode about 30 mins. after analogue
broadcast ends.
The remote control does not work
or is intermittent
Are the batteries installed correctly? (p. 8)
Has the TV been switched On?
The batteries may be running low. Replace them.
Point the remote control directly at the front of the TV (within about
7 m and a 30 degree angle of the front of the TV).
Situate the TV so that sunshine or other sources of bright light do
not shine on the TV’s remote control signal receiver.
Parts of the TV become hot
Temperature rises of parts of the front, top and rear panels will not
pose any problems in terms of performance or quality of the TV.
Overcurrent error message
appears
The connected USB device might cause this error. Remove the
device and turn the TV Off with Mains power On / Off switch, then
turn it On again.
Check if foreign objects are inside the USB port.
An error message appears
Follow the message’s instructions.
If the problem persists, contact your local Panasonic dealer or the
authorized Service Centre.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L42U3b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L42U3b in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L42U3b

Panasonic TX-L42U3b User Manual - English - 80 pages

Panasonic TX-L42U3b User Manual - Polish - 20 pages

Panasonic TX-L42U3b User Manual - Polish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info