523151
99
Zoom out
Zoom in
Previous page
1/108
Next page
Frequently Asked Questions
Technical Information
FAQs, etc.
99
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care
Centre for assistance. For details
p. 108
Block noise, frozen or
disappearing image occurs
in digital mode / White spots
or shadow image (ghosting)
occurs in analogue mode /
Some channels cannot be
tuned
Check the position, direction and connection of
the aerial.
Check “Signal Condition” (p. 43, 46 or p. 48). If
“Signal Quality” is displayed in red, the digital
signal is weak.
Check your postcode area is able to receive
the Freeview channels at www.freeview.co.uk
Digital signals may be relatively low to
prevent interference with analogue signals
for the period of Digital Switchover. Check
the schedule of Digital Switchover at www.
digitaluk.co.uk
Weather conditions will affect signal reception
(heavy rain, snow, etc.), in particular in poor
reception areas. Even during good weather,
high pressure can cause poor reception of
some channels.
Due to the digital reception technologies
involved, quality of the digital signals may be
relatively low in some cases, despite good
reception of analogue channels.
Turn the TV off with the Mains power On / Off
switch, and then on again.
If problem persists, consult your local dealer.
Neither image nor sound is
produced
Is the TV in AV mode?
Check the correct AV input mode is selected.
Check the mains lead is plugged into the
socket outlet.
Has the TV been turned On?
Check the Picture Menu (p. 32) and volume.
Check all required cables and connections are
firmly in place.
Auto aspect
Auto aspect is designed to provide you with the
best ratio to fill the screen. (p. 94)
Press the ASPECT button if you would like to
change the aspect ratio manually (p. 18).
S-Video / black and white picture
A black and white picture may be seen when the TV is
set to S-Video when the connected equipment is not.
Change the setting on the TV (p. 28).
Check that the output of the external equipment matches
the input of the TV. If the output of the external equipment is
set to S-Video, the TV must also be set to S-Video (p. 28).
Input mode, i.e. EC/AV1 remains
on the screen
Press the button to clear this message.
Press again to redisplay.
Q-Link function does not work
Confirm SCART cable and connection.
Also set “AV1 / AV2 out” in the Setup Menu (p. 34).
“VIERA Link” function does not
work and an error message appears
Confirm the connection. (p. 84 and p. 85)
Turn the connected equipment on and then switch the
TV on. (p. 87)
Recording does not start immediately
Check the settings of the recorder. For details, read the
manual of the recorder.
Contrast is reduced
Contrast is lowered in the following conditions without
any user operation for a few minutes:
no signal in DVB or AV mode
selection of a locked channel
selection of a invalid channel
selection of a radio channel
displayed menu
digital teletext (no video contents)
Thumbnail, list or still picture in Media Player or
DLNA operations
freesat Auto Setup cannot
be done completely
Check connections and dish alignment. The dish
needs to be pointing at Astra 2 at 28.2° East, and
Eurobird 1 at 28.5° East.
If the problem persists, consult your freesat
registered retailer or call Freesat (UK) Ltd on
0844 881 6700 or visit www.freesat.co.uk
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L42U3b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L42U3b in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L42U3b

Panasonic TX-L42U3b User Manual - English - 80 pages

Panasonic TX-L42U3b User Manual - Polish - 20 pages

Panasonic TX-L42U3b User Manual - Polish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info