523151
102
Zoom out
Zoom in
Previous page
1/108
Next page
102
Message Meaning / Action
All contents will be lost.
Are you sure to delete this device?
Once you unregister the USB HDD, all the recorded programme will be
erased.
All tuning data will be erased “Shipping Condition” will erase all tuning data (p. 51).
Are you sure ? Confirm correct operation.
Are you sure you want to delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may be
necessary to have an aerial installer check the signal and aerial alignment.
Reset channels. (p. 40 and p. 41)
Cannot register another device because
the list is full.
Up to 8 USB HDDs can be registered with this TV.
Child Lock is active!
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 54). You must enter the
PIN number before the channel will be displayed.
Faulty dish
The satellite cable might be short-circuited or there might be connection
problems of the cable. Check the cable and connection and then turn the
TV Off with the Mains power On / Off switch, and turn it On again.
If the message still persists, it may be necessary to have a dish installer
check the dish and cable.
Feature not available.
It is not possible to record from COMPONENT or HDMI. Connect the recorder
to the TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link or VIERA Link settings (p. 84 - 87).
Feature not available.
Press OK to view how it works.
The selected feature on VIERA TOOLS is not available. Press the OK
button to view the demonstration to explain how to use it.
Found new software version
∗∗∗
.
Press OK to start update (may take 40
mins) or Press EXIT to ignore
and you can update when TV is in standby
There is a new software available.
Invalid operation - Please check settings
and connections.
Check the Q-Link or VIERA Link connection and setting (p. 84 - 87).
Invalid system time. Please exit !
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Invalid system time, Timer Programming
will not work.
Please press TV button on remote control
and check time display on Banner
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
Max. number of timers already set ! The maximum number of timer programming events is 15.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting “New Channel
Message” to Off in “DVB Tuning Menu”.
Selecting OK will perform “Update Channel List”.
No channel found.
Please check aerial or local signal availability.
Press OK to start Auto Setup.
Follow the on screen instructions.
Please also refer to p. 99.
If channels are still not found, consult your local Panasonic dealer.
No module inserted Check the CI module is inserted completely (p. 57).
No recording - Already recording The equipment may already be recording.
No recording - Check media The tape or disc may be “write protected”, full, missing or damaged.
No recording - Playing The equipment may be playing the tape or disc.
No recording - Unknown reason The recording may not be performed. Check the equipment.
No service
The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 20)
No signal The TV cannot detect the signal. Check the connection of the RF cable.
Overcurrent error on USB device occurred.
Please remove the USB device, and switch
off the TV by mains power switch.
The connected USB device might cause overcurrent error. Follow the on
screen instructions.
Check if foreign objects are inside the USB port.
On screen messages
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic TX-L42U3b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic TX-L42U3b in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic TX-L42U3b

Panasonic TX-L42U3b User Manual - English - 80 pages

Panasonic TX-L42U3b User Manual - Polish - 20 pages

Panasonic TX-L42U3b User Manual - Polish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info