536677
68
Zoom out
Zoom in
Previous page
1/115
Next page
[LAMP POWER]
Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
Press 1) as to select [LAMP POWER].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[NORMAL] Select when high luminance is required.
[ECO1] Select when high luminance is not required.
[ECO2] Select when high luminance is not required and the operation sound is needed more quiet.
Note
You can reduce power consumption and operation noise, and extend the life of the lamps by setting to [ f ECO2] rather than
[ECO1], or by setting to [ECO1] rather than [NORMAL].
[ECO MANAGEMENT]
This function optimizes lamp power according to the operating status to reduce power consumption.
Press 1) as to select [ECO MANAGEMENT].
Press the <ENTER> button.2)
The [ECO MANAGEMENT] screen is displayed. f
Press 3) as to select one item.
Setting [AUTO POWER SAVE] in step 3)
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV MUTE
DETECTION].
Note
[AUTO POWER SAVE] cannot be set when the [LAMP POWER] is set f to [ECO2].
Press 4) qw to switch the [AUTO POWER SAVE].
[ON] Enables power-saving mode.
[OFF] Disables power-saving mode.
Press 5) as to select one item.
[AMBIENT LIGHT DETECTION] Adjusts the lamp power according to the ambient brightness.
[SIGNAL DETECTION] Drops the lamp power when no signal is input.
[AV MUTE DETECTION] Drops the lamp power in the AV mute mode.
Press 6) qw to switch the item.
The items will switch each time you press the button. f
[ON] Enables above setting.
[OFF] Disables above setting.
Note
Lamp power cannot reduced automatically in the following cases: f
- When [LAMP POWER] is set to [ECO2]
- When the lamp lit or the setting of [LAMP POWER] is completed, etc.
When [AUTO POWER SAVE] is set to [OFF], [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV MUTE f
DETECTION] cannot be set.
[AMBIENT LIGHT DETECTION] will not work correctly when placing some objects on the ambient luminance sensor. f
Setting [POWER MANAGEMENT] in step 3)
Set the operation as following if there is no signal input.
Press 1) as to select [POWER MANAGEMENT].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
68 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info