536677
66
Zoom out
Zoom in
Previous page
1/115
Next page
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æpage 45) for the operation of the menu screen.
After selecting the item, press f asqw to set.
[STATUS]
You can check the using status of the projector.
Press 1) as to select [STATUS].
Press the <ENTER> button.2)
The [STATUS] screen is displayed. f
[SIGNAL]
[NAME] Displays the name of input signal.
[FREQUENCY] Displays the scanning frequency of input signal.
[RUNTIME]*
1
[PROJECTOR] Displays the current usage time of projector.
[LAMP
(ET-)]
[NORMAL]
[ECO1]
[ECO2]
Displays the operation time of lamp in each mode (NORMAL/ECO1/ECO2).
It may differ from the actual runtime under the each setting of [NORMAL]/
[ECO1]/[ECO2] in [LAMP POWER] menu.
And, displays the model no. of the replacement lamp unit for this projector.
[SERIAL NUMBER] [PROJECTOR] Displays the serial number of the projector.
The following conversion is required to calculate the rough estimate for lamp replacement.*1
Formula for lamp replacement time (rough estimate)
A x 1 + B x 0.8 + C x 2/3
A : Runtime which is displayed in [STATUS] screen - [RUNTIME] - [LAMP] - [NORMAL] f
B : Runtime which is displayed in [STATUS] screen - [RUNTIME] - [LAMP] - [ECO1] f
C : Runtime which is displayed in [STATUS] screen - [RUNTIME] - [LAMP] - [ECO2] f
[COMPUTER2 SELECT]
Set whether to use the <COMPUTER 2 IN/1 OUT> terminal.
Press 1) as to select [COMPUTER2 SELECT].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[COMPUTER2 IN] When input the computer signal.
[COMPUTER1 OUT] Outputs the signal which have been input <COMPUTER 1 IN> terminal.
Note
The [COMPUTER2 SELECT] will be unavailable when COMPUTER2 is selected as input source. f
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable
simultaneous control or individual control via a single remote control.
Press 1) as to select [PROJECTOR ID].
Press the <ENTER> button.2)
The [PROJECTOR ID] screen is displayed. f
66 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info