536677
69
Zoom out
Zoom in
Previous page
1/115
Next page
[READY]
The countdown timer is displayed after 30 seconds without input signal. The projection lamp turns off and cools
down when reaching the set time, meanwhile the projector is in the power management mode.
The projection lamp will be turned on if the input signal is reconnected or any button is pressed.
[SHUT DOWN]
The countdown timer is displayed after 30 seconds without input signal. The projection lamp is turned off and cooled
down when reached the set time, then the projector enter into standby status.
[OFF] Power management function is off.
Setting [TIMER]
The timer can be set to 5-120 minutes. The increment is 5 minutes.
Press 1) as to select [TIMER].
Press 2) qw to set the timer (5-120 MIN.).
The time will switch each time you press the button. f
Setting [STANDBY MODE] in step 3)
Set the power consumption during standby.
Press 1) as to select [STANDBY MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ECO] Restricts some functions in the standby mode to reduce power consumption.
[NETWORK] Restricts network function in the standby mode.
[NORMAL] Does not restrict network function and serial communication function even in the standby mode.
Note
If [STANDBY MODE] is set to [ECO], you cannot use network functions when the projector is standing by. Also, you cannot f
use some RS-232C protocol commands.
When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, f
compared with when [NORMAL] is set.
If [STANDBY MODE] is set to [NETWORK], it takes less power consumption than it is set to [NORMAL]. f
When [STANDBY MODE] is set to [NETWORK], it will be no restriction for network function and serial communication f
function within 60 seconds when the Wake on LAN function is working.
The setting of [STANDBY MODE] cannot be returned to the factory default even if the [PROJECTOR SETUP] menu → f
[INITIALIZE ALL] is executed (Æpage 72).
[EMULATE]
When controlling the projector on a computer via the <SERIAL IN> terminal, set use of control commands on a previously
purchased Panasonic projector. This allows the control software for an existing Panasonic projector to be inherited and used.
Press 1) as to select [EMULATE].
Press the <ENTER> button.2)
The [EMULATE] screen is displayed. f
Press 3) as to switch the item.
The items will switch each time you press the button. f
[DEFAULT] VW340Z series, VX410Z series, RZ475 series, RZ470 series, RW430 series, RZ370 series, RW330 series
[D3500] D3500 series
[D4000] D4000 series
[D/W5k SERIES]
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
[D/W/Z6k SERIES]
DZ770 series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series,
DW730 series, DX800
series,
DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series, DZ570 series, DW530
series, DX500 series
[L730 SERIES] L730 series, L720 series, L520 series
[L780 SERIES] L780 series, L750 series
[L735 SERIES] L735 series
[L785 SERIES] L785 series
[F/W SERIES] FW430series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370] LZ370 series
[LB/W SERIES]
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78 series, LB75 series
ENGLISH - 69
Chapter 4 Settings - [PROJECTOR SETUP] menu
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info