Manual Otto Bock Avantgarde VR (page 77 of 96) (English, German)

682690

Zoom out

Zoom in

1/96

Height Adjustment of the Footrest Avantgarde T, Ti

8.9 and Ti Ultra

By loosening the screws at the footrest bar, the footplate can be continuously

adjusted according to your specific lower leg length and to the seat cushion being

used.

There are two threaded holes in the footrest bar, it therefore may be necessary

to completely remove the screw and use the second hole to achieve the desired

footrest height.

Be sure the cap screws have been re-tightened with a torque moment of 10 Nm.

By loosening the screw (Fig. 53, item a), the footplate can be adjusted according to your specific

lower leg length and to the seat cushion being used.

Ensure when adjusting the height that the footrest bar (item b) is pushed into the swivel

segment (item c) at least 60 mm.

Ensure when making adjustments to tighten the screw (item a) with a torque of 8

Nm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde VR Manual

Product: