682690

Otto Bock Avantgarde VR Manual

76
Zoom out
Zoom in
Previous page
1/96
Next page
76
The caster adapter allows you continuous angle adjustment.
First, remove the protective caps (Fig. 66, item B) from the caster adapters.
Next, loosen the two cap screws on the inner side of the frame (Fig. 67, item C),
followed by the cap screw on the outer side (Fig. 66, item D). Place the level from
the tool pouch on the top flat surface of the caster adapter (Fig. 67).
Now using a large screwdriver, rotate the eccentric plate so that the caster
adapter moves into horizontal position. When in this position, first tighten the cap
screw (Fig. 58, item D) followed by the cap screws (Fig. 66, 67, item C).
Ensure all cap screws are firmly re-tightened. The correct torque of the cap
screws (Fig. 60/61, item C) for the Avantgarde T, VR and XXL2 is 23 Nm; for the
Avantgarde Ti8.9 and Ti Ultra with aluminum screws the correct torque is 13 Nm.
68 69
Adjusting the Angle of the Footplate Avantgarde
T, VR and XXL 2
Angle adjustable footplates are included as
standard equipment.
Adjusting the Angle of the Footplate Avantgarde
Ti 8.9 and Ti Ultra
Angle adjustable footplates are included as
standard equipment.
Loosen the Allen head screw on the posterior footplate suspension with several
turns (Fig. 62). Adjust the footplate to the desired position and firmly re-tighten the
screw.
To adjust, slide a 5 mm Allen wrench through the side hole in the footrest bar until
the wrench locks into the Allen screw in the footplate. Loosen the screw by several
turns, then sharply tap the end of the Allen wrench, which will disengage the
clamp connection. Adjust the footplate to the desired position and firmly re-tighten
the screw.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info