682690

Otto Bock Avantgarde VR Manual

75
Zoom out
Zoom in
Previous page
1/96
Next page
75
Adjusting 2° Rear Wheel Camber
Position the tapered washer on the outer side of the rear wheel adapter with the thicker side up in
the desired locking position (from the outer side you can read the engraving »-2°«). Place the second
tapered washer with the thinner side up from the outer side against the first tapered washer (from
the outer side you can read the engraving »+2°«). The outer sides of the two camber washers
are parallel now (see sketch). Insert the rear wheel fitting, put on the lock washer from the inner
side and slightly tighten the hexagon nuts (Fig. 62, items A, C). Check the distance between
rear wheel and side panel and adjust by turning the fitting. Finally tighten the hexagon nuts with
a torque of 50 Nm.
Adjusting 4° Rear Wheel Camber
Position the tapered washer on the outer side of the rear wheel adapter with the thinner side up
in the desired locking position (from the outer side you can read the engraving »+2°«). Place the
second tapered washer on the inner side of the rear wheel adapter with the thicker side up in
the corresponding locking position (from the inner side you can read the engraving »-2°«). The
outer sides of the two camber washers are parallel now (see sketch). Insert the rear wheel
fitting, put on the lock washer from the inner side and slightly tighten the hexagon nuts (Fig. 62,
items A, C). Check the distance between rear wheel and side panel and adjust by turning the
fitting. Finally tighten the hexagon nuts with a torque of 50 Nm.
Please be aware that with a larger negative camber the overall width of the
wheelchair increases and the rear wheels are subjected to greater stresses!
Adjusting the Caster Wheel Journal Angle
After the rear wheels have been mounted in the appropriate position, the caster wheel journal
angle must be re-adjusted so the forks are at 90° in relation to the ground, so as to ensure op-
timal driving behavior of the wheelchair.
66 67
C
D
B
D
C
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info