Manual Otto Bock Avantgarde VR (page 73 of 96) (English, German)

682690

Zoom out

Zoom in

1/96

Loosen the nut (Fig. 58, item A) of the quick-release axle housing (Fig. 58, item B)

on the inside of the frame, until the tapered washers can be spread apart slightly.

Now you can move the quick-release axle housing with nuts and tapered washers

into the desired position. Let the lug of the tapered washers engage in the new

desired orientation and firmly re-tighten the nut (Fig. 58, item A). The torque for the

hexagon nuts (Fig. 58, items A, C) is 50 Nm.

Ensure the position/orientation of the tapered camber washers are not changed

and that both the left and right rear wheel quick-release axle housings are set in

the same vertical position.

Please be aware that changes in the rear wheel position will effect both the angle

of the caster wheel journal in relation to the ground, which may then have to be

altered so the forks are at 90°, and the wheel lock effectiveness, which will require

re-adjustment.

The distance between rear wheel and side panel can be continuously adjusted by

adjusting the rear wheel fitting (Fig. 58, item B).

Ensure all screws and nuts are firmly re-tightened after making adjustments!

Adjusting the Rear Wheel in the Rear Wheel Adapter XXL 2

Loosen and remove the nut (Fig. 63, item 1) of the rear wheel fitting (Fig. 63, item 2) on the inside

of the frame. The possible positions result from defined bore holes in the rear wheel adapter

(Fig. 64, item 3).

63 64

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde VR Manual

Product: