Manual Otto Bock Avantgarde VR (page 71 of 96) (English, German)

682690

Zoom out

Zoom in

1/96

To change the position of the rear wheels, first loosen the wheel lock attachment screws and

push the wheel lock forward. Once the rear wheels have been mounted in the new position, the

wheel lock should then be remounted so that when the wheel lock is in the off position, the dis-

tance between the tires and wheel brake block should be 5 mm maximum (subject to technical

changes) (Fig. 60).

Check the tire air pressure and the effectiveness of the locking devices regularly. The air pres-

sure is indicated on the side wall of the tire. It should be at least 3.5 bar (350 kPa). Ensure only

original rear wheels with approved radial excursion of a maximum of ± 1 mm are used, in order

to ensure satisfactory braking effect.

Ensure all screws and nuts are firmly re-tightened after making adjustments!

The further back the rear wheel is attached, the longer the wheelbase is and the greater the

wheelchair stability (refer to "Wheelbase Extension").

By attaching the rear wheel in a more forward position (only for trained wheelchair users!), the

maneuverability of the wheelchair increases and the caster wheels can be lifted more easily to

clear obstacles such as curbs or steps.

The wheelchair might tip on even ground if extreme adjustments have been made

(e.g. rear wheels have been fitted in their most forward position) and if the body

has not been appropriately positioned!

Using the anti-tipper is strongly recommended for untrained wheelchair users and

children, and also in the case of extreme rear wheel adjustments.

60 61

Adjusting the Wheel Lock Adjusting the Rear Wheel Adapter Position in the

Frame

0,5 cm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde VR Manual

Product: