Manual Otto Bock Avantgarde VR (page 72 of 96) (English, German)

682690

Zoom out

Zoom in

1/96

For transfemoral amputees, the rear wheels must be shifted backwards!

To adjust the horizontal position of the rear wheel first remove the countersunk

head screws (Fig. 57, items A, B). Choose the desired position and re-assemble

the screws (Fig. 57, items A, B) using a 10 Nm torque wrench.

Ensure that both the left and right rear wheel adapters are set in the same

horizontal position on either side of the frame.

Please note: Please be aware that changes in the rear wheel position will effect

both the angle of the caster wheel journal in relation to the ground, which may

then have to be altered so the forks are at 90°, and the wheel lock effectiveness,

which will require re-adjustment.

Ensure all screws and nuts are firmly re-tightened after making adjustments!

Each change of position of the quick-release axle housing in the rear wheel adapter has an influ-

ence on the posterior seat height and the center of gravity! The relation of anterior and posterior

seat height represents the individual seat inclination.

The higher you attach the rear wheel in the rear wheel adapter, the more the seat pitches down.

This has two effects: First, the wheelchair has a greater tendency to tilt backwards; second, the

user sits deeper in the wheelchair and thus has more stability.

Adjusting the Rear Wheel Position in the Rear

Wheel Adapter T, Ti 8.9 and VR

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde VR in the language / languages: English, German as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Otto Bock Avantgarde VR Manual

Product: