812558

Otto Bock Avantgarde CV Manual

48
Zoom out
Zoom in
Previous page
1/56
Next page
5 mm
151 152
3.12.3 Replacing the Brake Block
1) Unscrew the Allen head screw on the brake block (see Fig. 152).
2) Remove/replace the brake block.
3) Tighten the screw connection with 6Nm.
3.12.4 Retrofitting the Wheel Lock Lever Extension
1) Remove the wheel lock handle from the knee lever wheel lock (see Fig. 153). Cut open if necessary.
2) Slip the wheel lock lever extension on true to side (see Fig. 154).
153 154
3.12.5 Retrofitting the Drum Brake
In order to use rear wheels equipped with a drum brake, the standard fitting must be replaced with a mounting plate
with fitting, and brake handles and Bowden cables must be installed on the wheelchair.
Installing the mounting plate with fitting
1) Remove the standard fitting (quick-release axle housing) from the rear wheel adapter (see Page 45).
2) Install the rotation prevention.
3) Pre-install the mounting plate with fitting on the rear wheel adapter – do not tighten.
4) Insert the supplied spacer bushing between the mounting plate and the rotation prevention.
5) Connect the mounting plate and rotation prevention.
6) Install the mounting plate tightly on the fitting. Secure the hex nuts (size 24) with high-strength thread locker
(Loctite® 601). The proper tightening torque of the screw connection on the fitting is 50Nm on each side.
48 02/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info