812558
47
Zoom out
Zoom in
Previous page
1/56
Next page
148
3.12 Assembly H: Wheel Lock/Brake
3.12.1 Adjusting the Knee Lever Wheel Lock/Drum Brake
All instructions concerning the adjustment of the wheel lock/brake are included in the Instructions for Use (qualified
personnel) – order number 647G585.
3.12.2 Replacing the Knee Lever Wheel Lock
CAUTION
Inadequate braking function of the knee lever wheel lock
Risk of accidents, falling
Check the air pressure of the rear wheels and the correct setting of the knee lever wheel lock. The correct air
pressure is printed on the sidewall of the tyre. For rear wheels, the minimum air pressure is 7 bar.
Use only original rear wheels with a tested out-of-round of 1mm maximum.
1) Unscrew/remove the Allen head screws in the slide block on the bottom of the frame (see Fig. 149).
2) Carefully remove/replace the knee lever wheel lock from the slide block (see Fig. 150).
3) Position the knee lever wheel lock in place on the slide block and bolt down – do not tighten.
4) Adjust the knee lever wheel lock. The clearance between the tyres and the brake block when the wheel lock is not
actuated must be max. 5mm (see Fig. 151).
5) Tighten the Allen head screws to 6Nm.
After adjustment, the left and right knee lever wheel lock must have the same braking effect.
149 150
4702/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info