812558
49
Zoom out
Zoom in
Previous page
1/56
Next page
Installing the brake handles / Bowden cables
1) Install the brake handles on the back tubes (Phillips head screws; Retrofitting the Drum Brake [], similar to figure).
2) Route the Bowden cables from the brake handles to the brake drums. Make sure to prevent that scraping noises
can develop.
3) Connect the Bowden cables to the brake drums.
4) Install the rear wheels and readjust the Bowden cables if necessary.
5) The maximum braking force should be attained within the first third of the brake lever travel.
155 156
3.12.6 Adjusting the Drum Brake
The braking force can be adjusted via the adjusting nut (see Fig. 157, item 1).
Turning the adjusting screw out: the braking force is increased.
Turning the adjusting screw in: the braking force is decreased.
1) Turn the adjusting screw out until friction noise can be heard when the wheel is turned.
2) Turn the adjusting screw in until the friction noise disappears. Then the wheel should turn freely.
3) Secure the adjusting screw by tightening the lock nut (see Fig. 157, item 2).
INFORMATION
Note that the drum brake shows sufficient braking force only when the manual brake lever is locked in the 2nd ratchet
position.
INFORMATION
Ensure that the braking force of both rear wheels is adjusted equally.
157
4902/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info