812558
46
Zoom out
Zoom in
Previous page
1/56
Next page
3) Tightly bolt the push rings onto the rim in narrow or wide installation position.
4) Completely reinstall the tyre.
144 145
3.11.6.3 Tensioning the Spokes/Adjusting the Out-of-Round
Tensioning the spokes
1) Completely remove the tyre (see Fig. 145).
2) Check the spokes' tension by shaking/moving the spokes.
3) If necessary, carefully adjust the tension of the spokes with spoke tensioner.
4) Completely reinstall the tyre.
Adjusting the out-of-round
Adjusting the out-of-round to 1 mm maximum requires special instruments and technical knowledge. The adjustment
should be performed in a bicycle specialist workshop.
3.11.6.4 Adjusting the Quick-Release Axle
The quick-release axle (see Fig. 146) should be adjusted so that it engages properly and so that the wheel has no play
on the axle.
1) Hold the tip of the quick-release axle with a wrench (size 11).
2) Adjust the play by turning the nut on the end of the quick-release axle (size 19; see Fig. 146, item 1) in or out.
146 147
3.11.6.5 Retrofitting the Tetra Axle
1) Remove the quick-release axle with rear wheel.
2) Exchange quick-release axle for tetra axle.
3) Insert rear wheel with tetra axle into the fitting.
46 02/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Otto Bock Avantgarde CV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Otto Bock Avantgarde CV in the language / languages: English as an attachment in your email.

The manual is 10.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info