589363
4
Zoom out
Zoom in
Previous page
1/10
Next page
EN
3
1
2
3
4
6
7
5
8
9
1. LCD
Displays the current temperature monitored by the
remote unit
2. LED Indicator
Flashes when the remote unit transmits a reading
3. °C / °F Slide Switch
Selects between Centigrade (°C) and Fahrenheit (°F)
4. RESET Button
Returns all settings to default values
5. Channel Selection Switch
Designates the remote unit Channel 1, 2, or 3
6. Battery Compartment
Accommodates two AAA-size batteries
7. Battery Door
8. Wall-Mount
Used to attached the remote unit to a wall
9. Removable Table Stand
For positioning the remote unit on a flat surface
MAIN FEATURES: REMOTE UNIT
BEFORE YOU BEGIN
Position the remote and main units within effective
transmission range which in usual circumstances, is
20 to 30 meters.
For best operation:
1. Assign different channels to different remote units.
2. Insert batteries for remote units before doing so
for the main unit.
3. Place the main unit as close as possible to the
remote unit. Reset the main unit after installing
batteries to ensure easier synchronization
between the transmission and reception of
signals.
The effective range is affected by the building
materials and where the main and remote units are
positioned. Try various set-ups for best result.
Though the remote units are weather proof, they
should be placed away from direct sunlight, rain, or
snow.
REMOTE UNIT SETUP
For best results, use lithium ion batteries in the
remote sensing unit if the outdoor temperature falls
below -5 °C (41 °F), other battery types will not function
at such low temperatures.
If there is a clear plastic tab in the battery
compartment, please remove it before installing the
batteries.
To install the batteries and change the channel:
1. Remove the screws on the battery compartment.
2. Select the channel number on the CHANNEL
slide switch.
3. Select the temperature display unit on the °C/°F
slide switch.
NOTE
NOTE
4. Insert the batteries strictly according to the
polarities shown.
5. Replace the battery compartment door and secure
its screws.
6. Using a blunt stylus such as a paper clip, press
RESET.
BAR888 Eng R5 R 6/8/04, 10:44 AM3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BAR888 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR888 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR888

Oregon Scientific BAR888 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info