589363
5
Zoom out
Zoom in
Previous page
1/10
Next page
4
EN
Replace the batteries when the low-battery indicator
of the particular channel lights up on the main unit.
Note that once a channel is assigned to a remote unit,
you can only change it by replacing the batteries or
resetting the unit.
MAIN UNIT SETUP
To install the batteries:
1. Slide open the battery compartment door.
2. Insert the batteries according to the polarities
shown.
3. Replace the battery compartment door.
Change the batteries when the low-battery indicator
for the indoor temperature lights up.
If there is a clear plastic tab in the battery
compartment, please remove it before installing the
batteries.
LOW BATTERY WARNING
When it is time to replace batteries, the low-battery
indicator will show up when the respective channel is
selected. The battery level of the main unit will be
shown on the indoor temperature display when it is
running low.
TABLE STAND OR WALL MOUNT
The main unit has a retractable table stand, which when
flipped open, can support the unit on a flat surface. Or
you can flip close the stand and mount the unit on a
wall using the recessed screw hole.
MAIN UNIT
The main unit comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
NOTE
2.Flip up the stand
1. Lift up the back cover
3. Close the back cover
Table StandWall-mount
REMOTE UNIT
THE RESET BUTTON
This button is only used when the unit is operating in
an unfavorable way or malfunctioning. Insert a pointed
object such as an unfolded paper clip into the reset
hole, then press and hold. All settings will return to
their default values.
GETTING STARTED
Once batteries are in place for the remote units, they
will start transmitting temperature readings at
30-second intervals.
The main unit will also start searching for signals for
about a minute once batteries are installed. Upon
successful reception, the individual channel
temperatures will be displayed on the 2nd line and the
indoors temperature on the 3rd line. The main unit will
automatically update its readings at about 30-second
intervals.
If no signals are received, blanks “ ” will be
displayed and the kinetic wave icon will show “
”.
Press CHANNEL and MEMORY simultaneously to
enforce another search for about 30 seconds. This is
useful in synchronizing the transmission and reception
of the remote and main units.
Repeat this step whenever you find discrepancies
between the reading shown on the main unit and the
respective remote unit.
BAR888 Eng R5 R 6/8/04, 10:44 AM4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BAR888 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR888 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR888

Oregon Scientific BAR888 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info