589363
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN
7
Tips:
If there is an item you do not wish to change,
simply press MODE / SET to bypass that
setting.
Press and hold + / - to rapidly change a value.
SET AND ARM THE ALARM
To set the alarm,
1. Press 24hr
OFF once to display the alarm time.
The alarm time that was last set will be displayed.
If you have never set the alarm before, the time
will be displayed as 12:00am.
2. Press 24hr
OFF for three seconds. The hour
digits will blink.
3. Enter the hour using + / -.
4. Press 24hr
OFF. The minute digits will blink.
5. Enter the minutes using + / -.
6. Press 24hr
OFF to exit.
You can arm or disarm an alarm by pressing the
ON / OFF button; an
icon will show when the
alarm is activated.
STOP THE ALARM
To stop an alarm, you can use either 24hr
OFF or
ON / OFF.
Pressing 24hr
OFF will stop the alarm, but
it will remain armed and will go off at the set
time the next day.
Pressing
ON / OFF will stop the alarm and
deactivate it altogether.
SPECIFICATIONS
TEMPERATURE MEASUREMENT
Main unit
Indoor Temperature measurement
Displayed IN temperature -9.9°C to +70.0°C
range (14.2°F to 158.0°F)
Proposed operating range -5.0°C to +50.0°C
(23.0°F to 122.0°F)
Temperature resolution 0.1°C (0.2°F)
Remote Temperature measurement
Displayed OUT temperature -50.0°C to +70.0°C
range (-58.0°F to 158.0°F)
Proposed operating range -5.0°C to +50.0°C
(23.0°F to 122.0°F)
Temperature resolution 0.1°C (0.2°F)
Remote unit
Displayed range -50.0°C to +70.0°C
(-58.0°F to 158.0°F)
Proposed operating range -20.0°C to +60.0°C
with alkaline batteries (-4.0°F to 140.0°F)
Temperature resolution 0.1°C (0.2°F)
RF Transmission Frequency 433 MHz
No. of Remote unit Maximum of 3
RF Transmission Range Maximum 30 meters
(100 feet)
Temperature sensing cycle Approximately
30 seconds
BAROMETRIC PRESSURE MEASUREMENT
Pressure measuring range 795 to 1050 mb/ hPa
(23.48 to 31.01 inHg)
Pressure sampling cycle 15 minutes
RADIO CONTROLLED CLOCK
Maintime set and synchronized by Radio Signal
from Frankfurt Germany (DCF77).
12 h display with hh:mm:ss
Day of week selectable in 3 language (E,F,S)
2-minute crescendo alarm
POWER
Main unit 4 x UM-3 “AA”
1.5V alkaline battery
Remote sensing unit 2 x UM-4 "AAA"
1.5V alkaline battery
BAR888 Eng R5 R 6/8/04, 10:44 AM7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oregon Scientific BAR888 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oregon Scientific BAR888 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oregon Scientific BAR888

Oregon Scientific BAR888 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info