492661
69
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-69
Speaker Distance
Here you can specify the distance from each speaker to the
listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer intended.
You can set the distances for front speakers A and front
speakers B independently. The other speakers (i.e.,
subwoofer, center, surround, surround back and front high)
use the same distance settings for Speakers A and
Speakers B.
Unit
(North American models)
` feet
:
Distances can be set in feet. Range: 0.2ft to 30.0ft in
0.2 foot steps.
` meters:
Distances can be set in meters. Range: 0.06m to
9.00m in 0.06 meter steps.
(European models)
` feet:
Distances can be set in feet. Range: 0.2ft to 60.0ft in
0.2 foot steps.
` meters
:
Distances can be set in meters. Range: 0.06m to
18.00m in 0.06 meter steps.
Left, Front Wide Left, Front High Left, Center,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right, Surround
Back Left, Surround Left, Subwoofer 1,
Subwoofer 2
*1
` Specify the distance from each speaker to your
listening position.
Note
Speakers that you set to “No” or None” in “Speaker
Configuration” cannot be selected ( page 67).
Speakers B cannot be selected if “Speakers Type(Front B)” is
set to “No” ( page 66).
When the “Powered Zone 3” setting is set to “Yes
( page 66) while Powered Zone 2 is enabled ( page 89),
the surround back speakers cannot be used.
*1
If the “Subwoofer” setting is set to “1ch”, this setting cannot
be selected ( page 67).
Level Calibration
Here you can adjust the level of each speaker with the
built-in test tone so that the volume of each speaker is the
same at the listening position.
You can set the levels of front speakers A and front
speakers B independently. The other speakers (i.e.,
subwoofer, center, surround, surround back and front high)
use the same level settings for Speakers A and Speakers B.
Left, Front Wide Left, Front High Left, Center
*1
,
Front High Right, Front Wide Right, Right,
Surround Right, Surround Back Right, Surround
Back Left, Surround Left
` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
Subwoofer 1
*1
, Subwoofer 2
*1*2
` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps.
Note
These settings cannot be calibrated when the AV receiver is
muted.
Speakers that you set to “No” or “None” in “Speaker
Configuration” cannot be selected ( page 67).
When the “Powered Zone 3” setting is set to “Yes
( page 66) while Powered Zone 2 is enabled ( page 89),
the surround back speakers cannot be used.
The test tone is output at the standard level for THX, which is
0 dB (absolute volume setting 82). If you normally listen at
volume settings below this, be careful because the test tone will
be much louder.
Speakers B cannot be selected if “Speakers Type(Front B)” is
set to “No” ( page 66).
*1
For the center speaker and subwoofer, the level settings made
by using the Quick Setup are saved in this menu ( page 59).
*2
If the “Subwoofer” setting is set to “1ch”, this setting cannot
be selected ( page 67).
Tip
If you’re using a handheld sound level meter, adjust the level of
each speaker so that it reads 75 dB SPL at the listening position,
measured with C-weighting and slow reading.
This setting is set automatically by
Audyssey MultEQ
®
XT32 Room Correction and
Speaker Setup function ( page 42). For Speakers B,
you need to change the settings manually.
This setting is set automatically by
Audyssey MultEQ XT32 Room Correction and Speaker
Setup function ( page 42). For Speakers B, you need
to change the settings manually.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3010

Onkyo TX-NR3010 User Manual - German - 168 pages

Onkyo TX-NR3010 User Manual - Dutch - 168 pages

Onkyo TX-NR3010 User Manual - French - 168 pages

Onkyo TX-NR3010 User Manual - Italian - 168 pages

Onkyo TX-NR3010 User Manual - Swedish - 168 pages

Onkyo TX-NR3010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info