492661
68
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-68
Note
*1
Full Band” can be selected only when “Full Band” is
selected in the “Front” setting.
*2
When the “Powered Zone 3” setting is set to “Yes”, this
setting cannot be selected.
*3
This setting cannot be selected if the “Speakers
Type(Front A)” or “Speakers Type(Front B)” setting is set
to “Bi-Amp” or “Digital Crossover”.
*4
When the “Powered Zone 2” setting is set to “Yes”, this
setting cannot be selected.
*5
When the “Powered Zone 3” setting is set to “Yes
( page 66) while Powered Zone 2 is enabled ( page 89),
this setting cannot be selected.
*6
If the “Surround” setting is set to “None”, this setting cannot
be selected.
*7
If the “11ch Playback” setting is enabled, “None” cannot be
selected.
*8
Full Band” can be selected only when “Full Band” is
selected in the “Front”(Speakers A) setting.
*9
If anything other than “No” is selected in “Speakers
Type(Front B)”, this setting cannot be selected.
*10
When the “Speakers Type(Front A)” setting is set to
Bi-Amp” or “Digital Crossover” while Powered Zone 2 is
enabled ( page 89), this setting cannot be selected.
Surround Back Ch
` 1ch:
Select if only one surround back speaker L is
connected.
` 2ch
:
Select if two (left and right) surround back speakers
are connected.
Note
If the “Surround Back” setting is set to “None”, this setting
cannot be selected.
LPF of LFE
(Low-Pass Filter for the LFE Channel)
` 80Hz, 90Hz, 100Hz, 110Hz, 120Hz
` Off:
Low-Pass Filter is not applied.
With this setting, you can specify the cutoff frequency of
the LFE channel’s low-pass filter (LPF), which can be
used to filter out unwanted hum. The LPF only applies to
sources that use the LFE channel.
Note
If you’re using THX-certified speakers, select “80Hz”.
Subwoofer Phase
` 0
º
` 180º:
Moves the subwoofer phase.
Note
If the “Subwoofer” setting is set to “No”, this setting cannot be
selected.
Double Bass
` On
` Off(THX)
Turn this setting on to boost bass output by feeding bass
sounds from the front left, right, and center channels to
the subwoofer.
Note
When the “Subwoofer” setting is set to “No” or the “Front
setting to anything other than “Full Band”, this setting is fixed to
-----”.
This setting is set to “On” automatically when the “Subwoofer
setting is set to “1ch” or “2ch” and the “Front” setting is set to
Full Band” for the first time.
If you’re using THX-certified speakers, select “Off(THX)”.
Subwoofer, Front, Center, Surround,
Front High, Surround Back
(Setting Speakers A and Speakers B)
` Not Use:
Select if you don’t want to use each speaker with
Speakers A or Speakers B.
` Use
:
Select if you do want to use each speaker with
Speakers A or Speakers B.
If you’re using Speakers B, you can choose whether or not
to use the subwoofer, center, surround, front high, and
surround back speakers with the Speakers A and Speakers
B configurations independently. You cannot choose
whether or not to use the front speakers.
Note
These settings can only be displayed when the “Speakers
Type(Front B)” setting is set to other than “No” ( page 66).
You cannot select speakers that you set to “No” or “None”.
•“Front” is fixed to “Use”.
This setting is NOT set automatically by
Audyssey MultEQ
®
XT32 Room Correction and
Speaker Setup function ( page 42).
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR3010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR3010

Onkyo TX-NR3010 User Manual - German - 168 pages

Onkyo TX-NR3010 User Manual - Dutch - 168 pages

Onkyo TX-NR3010 User Manual - French - 168 pages

Onkyo TX-NR3010 User Manual - Italian - 168 pages

Onkyo TX-NR3010 User Manual - Swedish - 168 pages

Onkyo TX-NR3010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info