492763

One for All URC 8090 Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
HOW TO USE THE SHIFT KEY
The
Home Producer 8
has features that can be
accessed by using the SHIFT key. These features
are listed above the key that they are mapped to.
For example, on the transport keys (PLAY, REW,
FF, STOP and PAUSE) there are the following
features: SLOW, SLOW +, SLOW -, X2 and
EJECT. These are accessed by pressing SHIFT
and the key, for example, to eject a tape from your
VCR press:
SHIFT + STOP
This will eject your tape, as long as your original
remote supported this feature.
Note: Once you have pressed the SHIFT key, the
Home Producer 8 will remain in the "Shift" mode,
indicated by a
S
on the LCD screen, for 5 seconds
after the last key press or until the SHIFT key is
pressed again.
The following keys have functions that are shifted:
CENTER: SHIFT + CENTER = REAR
MENU: SHIFT + MENU = PROGRAM
SELECT: SHIFT + SELECT = CLEAR
MUTE: SHIFT + MUTE = SLEEP
PREV CH: SHIFT + PREV CH = DISPLAY
PIP: SHIFT + PIP = FREEZE PIP
REW: SHIFT + REW = SLOW-
PLAY: SHIFT + PLAY = SLOW
FF: SHIFT + FF = SLOW +
STOP: SHIFT + STOP = EJECT
PAUSE: SHIFT + PAUSE = X2
For a more detailed explanation of what function
each shifted key performs by device type (TV, VCR,
etc.), please refer to pages 45 through 57.
REPEATING A SERIES OF KEY PRESSES USING
THE AUD AND VID KEYS
The
Home Producer 8
has two Macro keys (AUD
and VID) that allow the user to play back a series of
key strokes at any time with the press of one key.
Each sequence can have up to a maximum of 15
keystrokes. For example, to set up a sequence that
will turn on your devices and turn the devices to the
proper inputs:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ]. Press MENU -
twice until the display reads
[CONFIGURE], then press SELECT.
The display will then read
[THEATR SEL].
2 Press MENU - four times until the
display reads [KEY MACRO]. Press
SELECT. The display will read
[SEL MACKEY]. Press either the
AUD or VID sequence key. This will
be the key that will play back the
series of keystrokes assigned to that
key. The display will then read
[SELECT SEQ]. Begin entering the
sequence of keystrokes, up to 15,
that you wish to be played back
when you press either AUD or VID.
For example:
TUN + POWER + TV + POWER +
TV/SAT (To change the input on the
TV to VIDEO 1) + SAT + POWER.
NOTE: You cannot use either the AUD or VID keys
in your macro sequence.
3 When your macro sequence is
concluded, press ESC to save.
Whenever the sequence key is pressed, the Tuner will
power ON, the TV will power ON and change the input
to VIDEO 1 and then the Satellite will power ON.
Repeat these steps to then setup the other se-
quence key (either AUD or VID) to your needs.
NOTE: If you make a mistake during the setup of a
macro sequence, press ESC to return to the main
display screen and begin the setup of your sequence
again.
or
M
A
G
I
C
MENU-
S
E
L
E
C
T
AUD
VID
(Sequence)
MENU-
S
E
L
E
C
T
x 2
x 4
E
S
C
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8090 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info